S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Lab Ovens and Incubators
Your work is important. That’s why every incubator and laboratory oven from MIDSCI is reliably engineered and stringently tested.
MIDSCI has the incubator oven for your research applications. Manufactured by respected names like Labnet, Shel Lab, Lab Companion, BINDER, Benchmark, and more, these lab incubators deliver performance you can rely on.
Features include excellent temperature uniformity and accuracy, rapid temperature recovery after opening, and over-temperature protection.
And if you’re looking for a lab oven, then you’ll have a wide selection to choose from.
We have gravity and forced convection ovens, hybridization ovens, and vacuum ovens.
MIDSCI also provides two options for hybridization ovens with shaking: Shake ‘n’ Bake hybridization oven from Boekel and Problot 12S hybridization oven from Labnet.
This product is no longer available.
For a newer version of this product, visit here.
H3550-180, replacement is H3565-180
H3551-180P, replacement is H3565-180
H3551-45P, replacement is H3565-45
Benchmark CO2 Incubators
- Precision temperature control, 6-sided heating
- Precise monitoring over CO2 with dual beam IR sensor
- Seamless, stainless-steel chamber
- Digital control of humidity percentage (PLUS models only)
With our unique and proprietary heat distribution technology, the Benchmark ST Series of CO2 incubators provide the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system, in combination with a low-speed internal fan, uniformly spreads air throughout the chamber (without air exchange from the external environment). The chamber walls are constructed of high grade (316) stainless-steel, and all corners are rounded, preventing the accumulation of dirt/debris.
For added security, all models feature an internal alarm to alert the user if the CO2 percentage changes, or the temperature fluctuates by more than 1°C from the set point. In addition, a quick-cal calibration button allows for quickly adjusting the chamber temperature to match that of a properly calibrated external thermometer.
Two series (standard and PLUS) are each available in 45L and 180L chamber sizes. PLUS models include advanced programming for high heat decontamination (at 125°C), a unique split inner glass door for access to the chamber without exposing it fully to the external environment and programmable humidity percentage, up to 95%.
Specifications
Temperature Range | Ambient +5° to 60°C |
Temperature Increments | 0.1°C |
Temperature Uniformity | ± 0.4°C* |
Temperature Stability | 0.1°C |
Temperature Accuracy | 0.1°C |
CO2 Range | 0 to 20% |
CO2 Increment | 0.10% |
CO2 Accuracy | ± 0.1% |
CO2 Sensor | Dual Beam IR |
Chamber Dimensions (45L) | 13.2 x 14.2 x 15.4 in. / 33.5 x 36.1 x 39.2 cm |
Chamber Dimensions (180L) | 18.7 x 20.8 x 28 in. / 47.3 x 52.8 x 71 cm |
Chamber Volume | 45L / 180L |
Chamber Material | Stainless Steel (316) |
Exterior Dimensions (45L) | 16.5 x 18.3 x 21.8 in. / 42 x 46.5 x 55.3 cm |
Exterior Dimensions (180L) | 22 x 26.2 x 37.2 in / 56 x 66.5 x 94.5 cm |
Weight (45L) | 77 lbs / 35 Kg |
Weight (180L) | 172 lbs / 78 Kg |
Electrical | 120V or 230V, 50-60Hz (350W) |
Warranty | 2 years |
PLUS Models Only
High Heat Decon | 125°C for 8 hours |
Humidity Control | Up to 95% |
Split Inner Door Compartments | 45L: 2 / 180L: 6 |
On Target Promo!
*Receive a free VM1-B-F (BV101-B), MF12-F (C1012) or E5001-SD-F (E5001-SD)
*Choose 1
With the purchase of INCO2-H
See details HERE
Valid through October 31st, 2022. Institutional pricing not valid. All terms apply
PR1MA™ Mini CO2 Incubator
- Digital control of temperature and CO2
- Personal sized, 13 x 14.5 in. footprint (20 L)
- Accepts bottles and flasks up to 2 L
- Includes 2 stainless steel shelves
- Dual beam, infrared sensor
Both temperature and CO2 percentage are digitally adjustable and displayed in real time on the large LED control panel. This panel also features a “Cal” function, for easy in-lab calibration of the temperature or CO2. In addition, humidity (up to 80%) can be added to the chamber by inserting the included (stainless steel) humidity reservoir.
The CO2 level is constantly monitored using dual beam infrared sensing technology. In the event of a drop in CO2, audible and visual alarms are triggered, notifying the user of the error. Despite its small size, the incubator features a relatively large 20 L chamber with the capacity for flasks and bottles up to 2 liters. Two removable, stainless-steel shelves are included. The shelves are perforated to improve airflow within the chamber. * If disconnected from the CO2 supply, CO2 percentage decreases by approx. 1%/30 min.
Specifications
Temperature Range |
Room Temperature -10°C to 55°C |
Temperature Accuracy |
0.25°C (at 37°C) |
Temperature Uniformity |
0.5°C (at 37°C) |
Temperature Increment |
0.1°C |
CO2 Range |
0 to 20% |
CO2 Sensor |
Dual beam infrared |
CO2 Accuracy |
0.1% (at 5%) |
Humidity |
70 to 80% |
Exterior Dims. |
13.2 x 14.5 x 18.7 in. |
Interior Dims. |
10.3 x 9.3 x 12.8 in. |
Capacity |
20 L | 0.7 Cu Ft |
Weight |
15 lbs | 6.5 kg |
Electrical |
100 to 240V, 50-60 Hz |
Warranty |
2 Years |
PR1MA™ Digital Incubator
- Digital temperature control
- Personal sized, 13 x 14.5″ footprint (20 L)
- Accepts bottles and flasks up to 2 L
- Internal outlet, for installation of shaker, rockers, etc.
With digital temperature control, the PR1MA™ Digital Refrigerated Incubator provides convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel.
Despite a modest footprint of 14.5 x 13″, the incubator features a large internal chamber, capable of storing flasks and bottles up to 2 Liters. In addition, the incubator includes two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (H3D1020) supplied with both flat and dimpled mats is available for agitation of samples during incubation.
Specifications
Temp. Range |
5°C above ambient to 60°C |
Temp. Accuracy |
0.5°C (at 37°C) |
Temp. Uniformity |
± 1.5°C (at 37°C) |
Temperature Increment |
1°C |
Exterior Dimensions (W x D x H) |
13.2 x 14.5 x 18.7 in | 33.5 x 37 x 47.5 cm |
Interior Dimensions (W x D x H) |
10.3 x 9.3 x 12.8 in | 26 x 23.5 x 32.5 cm |
Platform Dimensions (H3D1020) |
9.5 x 11.5 in | 23.5 x 29 cm |
Operating Temp. Range (H3D1020) |
+4°C to +65°C |
Capacity |
20 L | 0.75 ft³ |
Weight |
15 lbs | 6.5 kg |
Warranty |
2 Years |
Electrical |
100 to 240V, 50-60 Hz |
Warranty |
2 Years |
Models
|
Order# |
Description |
|
IN20-H |
PR1MA™ Digital
Incubator, Heat only (Ambient +1° to 60°C) 20 L, 100-240V |
|
IN20-HC |
PR1MA™ Digital Incubator,
Heat + Cool (Ambient -15° to 60°C) 20 L, 100-240V |
|
H2200-SH |
Extra Shelf 10.5 x 8 in.
for IN20-H or IN20-HC |
|
H3D1020 |
Mini Nutating Rocker
w/flat cord, 8 x 6 in. Platform, 115V |
PR1MA™ Digital Refrigerated Incubator
- Digital temperature control
- Personal sized, 13 x 14.5 in. footprint (20 L)
- Accepts bottles and flasks up to 2 L
- Internal outlet, for installation of shaker, rockers, etc.
With digital temperature control, the PR1MA™ Digital Refrigerated Incubator provides convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up or cool down while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel.
Despite a modest footprint of 14.5 x 13″, the incubator features a large internal chamber, capable of storing flasks and bottles up to 2 Liters. In addition, the incubator includes two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (H3D1020) supplied with both flat and dimpled mats is available for agitation of samples during incubation.
Specifications
Temp. Range |
15°C below ambient to 60°C* |
Temp. Accuracy |
0.5°C (at 37°C) |
Temp. Uniformity |
± 1.5°C (at 37°C) |
Temperature Increment |
1°C |
Exterior Dimensions (W x D x H) |
13.2 x 14.5 x 18.7 in | 33.5 x 37 x 47.5 cm |
Interior Dimensions (W x D x H) |
10.3 x 9.3 x 12.8 in. | 26 x 23.5 x 32.5 cm |
Platform Dimensions (H3D1020) |
9.5 x 11.5 in. | 23.5 x 29 cm |
Operating Temp. Range (H3D1020) |
+4°C to +65°C |
Capacity |
20 L | 0.75 ft³ |
Weight |
15 lbs | 6.5 kg |
Warranty |
2 Years |
Electrical |
100 to 240V, 50-60Hz |
Warranty |
2 Years |
* Minimum temperature is approx. 7°C in 22°C room temp. |
|
Standard Design Features:
- Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability
- Unique water jacket design provides excellent temperature uniformity of +/-0.2°C at 37°C
- Humidity levels, maintained through evaporation, of up to 95%
- Data logging capabilities
- Designed to minimize contamination; includes:
- Patented copper-caged HEPA filter
- Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
- Durable stainless steel chamber with coved corners for easy cleaning
- Exclusive heated copper CO2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber
- Copper shelving option
- Autoclavable shelving system
- Industry best warranty 5 years parts and labor in the USA, 7 years on the IR sensor
MODEL
SCO5W
PART ID
SCO5W
EXTERIOR DIMENSIONS (W × D × H)
26 × 25.5 × 40.3
(661 mm × 648 mm × 1024 mm)
INTERIOR DIMENSIONS (W × D × H)
19.3 × 19.8 × 23
(490 mm × 503 mm × 584 mm)
VOLUME
5.1 cu.ft. (144 L)
SHELF DIMENSIONS (W × D)
19.1 × 19.1 (485 mm × 485 mm)
UNIT WEIGHT
254 lbs (115.2 kg)
INTERIOR METAL
300 SST
EXTERIOR METAL
Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE
Amb +5C - 60C
TEMPERATURE UNIFORMITY - MIDRANGE
0.2 °C
TEMPERATURE STABILITY - MIDRANGE
0.1 °C
CONTROLLER TYPE
Digital
DISPLAY RESOLUTION
0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT
110-120 VAC, 50/60 Hz, 5.0 Amps
MAX HVAC LOAD
2137 BTUs/hr
SAFETY CERTIFICATIONS
UL 61010-1, EN 61010-1, CSA 61010-1, CE
Although they do not have a humidity display, the extremely stable temperature environment maintains constant humidity through evaporation at 95%. Double wall construction reduces this unit's footprint, so they fit in tight spaces as well as tight budgets.
The audible/visual alarms for temperature and CO2 respond to out-of-tolerance conditions. They offer an independent overtemperature safety control to protect samples from overheating, and an optional CO2 tank switch/alarm to prevent prematurely exhausting the gas supply. Features include:
- Infrared CO2 Sensor
- Heated Outer Door
- Independent Overtemperature Protection
- Quick Clean Shelf System
Specifications: |
SCO6WE |
Chamber Capacity: |
6.0 cu.ft |
Temp Range: |
Ambient + 8°C to 60°C |
Temp Uniformity: |
+/- 0.2°C at 37°C. |
CO2 Sensor |
Infrared (IR) |
CO2 Range: |
0-20% |
CO2 Recovery Rate: |
< 5 minutes |
Interior Dimensions |
20.2 x 19.7 x 25.2 (51.4 x 50.1 x 64.1 cm) |
Exterior Dimensions |
26.0 x 26.3 x 40.3 (66.0 x 66.7 x 102.2 cm) |
Shelves: |
3 supplied (16 max) |
Net weight/Shipping Weight: |
245/310 lbs. |
Standard Design Features:
- Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability.
- Unique air jacket design provides excellent temperature uniformity of +/-0.25°C at 37°C.
- Humidity levels maintained through evaporation of up to 95%
- Data logging capabilities
- Designed to minimize contamination; incudes:
- The fastest high heat decontamination cycle on the market without having to remove critical components
- Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
- Durable stainless steel chamber with coved corners for easy cleaning
- Exclusive heated copper CO2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber
- Copper shelving option
- Autoclavable shelving system
- Industry best warranty - 5 years parts and labor in the USA, 7 years on the IR sensor
EXTERIOR DIMENSIONS (W × D × H)
28.5 × 30.8 × 39.5
(724 mm × 783 mm × 1004 mm)
INTERIOR DIMENSIONS (W × D × H)
20.2 × 20 × 25.5
(513 mm × 508 mm × 648 mm)
VOLUME
5.9 cu.ft. (167 L)
SHELF DIMENSIONS (W × D)
19.1 × 19.1 (485 mm × 485 mm)
UNIT WEIGHT
238 lbs (108 kg)
INTERIOR METAL
300 SST
EXTERIOR METAL
Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE
Amb +5C - 50C
TEMPERATURE UNIFORMITY - MIDRANGE
0.25 °C
TEMPERATURE STABILITY - MIDRANGE
0.1 °C
CONTROLLER TYPE
Digital
DISPLAY RESOLUTION
0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT
110-120 VAC, 50/60 Hz, 12.0 Amps
MAX HVAC LOAD
2354 BTUs/hr
SAFETY CERTIFICATIONS
UL 61010-1, EN 61010-1, CSA 61010-1, CE
SCO2W CO
2 Incubator, Water Jacket, 1.5 Cu Ft, IR, HEPA, 115 V
Model SCO2W water jacketed CO
2 incubator and is an ideal benchtop unit for cell culture applications. It provides a precisely controlled, accurate, pure environment throughout the culturing process. Shel Lab CO
2 incubators are designed to provide the uniform temperatures and highly stable CO
2 environments that are necessary to prevent shocks to cells. Need more space? This unit is also available in 5 cu.ft /143 L (Model SCO5W).
Standard Design Features:
- Infrared (IR) CO
2_Sensor is extremely quick to recover CO
2 levels after door openings and ensures superior pH stability - Unique water jacket design provides excellent temperature uniformity of +/-0.2°C at 37°C
- Humidity levels maintained through evaporation of up to 95%
- Data logging capabilities
- Designed to minimize contamination; includes:
- Patented copper-caged HEPA filter
- Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
- Durable stainless steel chamber with coved corners for easy cleaning
- Exclusive heated copper CO
2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber - Copper shelving option
- Autoclavable shelving system
- Industry best warranty- 5 years parts and labor in the USA, 7 years on the IR sensor
HB-3D Hybrigene
- Temp Range from 10°C above ambient to 80°C
- Can hold up to 16 mini or 4 large glass tubes
- Flexibility at an affordable price, offering excellent temperature accuracy and uniformity
- The Hybrigene is a compact, stackable alternative to the Hybridiser HB-1D - for when space is important
- Stack up to 3 ovens, saving on valuable laboratory space
Technical Specifications
Specification
HB-3D Hybrigene
Maximum glass tube capacity
16 mini tubes
Maximum temperature
80°C
Minimum temperature
10°C above ambient
Adjustable rotation speed
0, 5 to 20 rpm
Adjustable rocking platform
5-20 or 15-60 opm
Stability in chamber
1.0°C
Stability in tubes
±0.1°C
Uniformity in chamber
±1.5°C
Uniformity in tube
±0.5°C
Temperature set point resolution
0.1°C
Absolute accuracy
±0.3°C
Dimensions L x W x H (mm)
355 x 383 x 432
Voltage
230V, 50-60Hz
Power
750W
Shipping Weight
21kg
Order # |
Capacity (Cu.Ft.) |
Max Temp (°C) |
Wattage |
Amps |
Inside Dimensions (in.) (WxHxD) |
Outside Dimensions (in.) (WxHxD) |
Shipping Weight (lbs.) |
10AF |
0.6 |
225 |
800 |
6.95 |
12x8.62x10 |
14x20.5x12 |
50 |
20AF |
1.14 |
225 |
1000 |
8.69 |
13x11.625x13 |
15x24.5x15 |
66 |
30AF |
1.83 |
225 |
1600 |
13.91 |
18x14.625x12 |
20x28.5x14 |
82 |
40AF |
2.86 |
225 |
1600 |
13.91 |
18x19.625x14 |
20x33.5x16 |
112 |
Warranty: 18 months
The HB-500 Minidizer is a personal, desktop hybridization oven that is ideal for use in laboratories with low use and limited space requirements. Microprocessor controls allow for consistent, repeatable results and the chamber interior is stainless steel with a 3/8" beta-blocking acrylic cover. The cover swings down for direct access to the bottle carousel, which can be removed from the chamber for the easy insertion or removal of bottles.
In addition to the hybridization oven features mentioned above, the Crosslinker In 95-0031-01 features:
· Preset and manual controls for ultraviolet or time exposures
· Preset exposure delivers 120,000 microjoules or five minutes of exposure
· Shortwave 254nm, 8 watt, ultraviolet tubes
· Microprocessor measures and controls UV output, ensuring maximum energy efficiency
· Large LED display continuously displays time or energy settings
· Tactile membrane switch keypad
· Window on the door allows viewing of the process yet blocks out the UV radiation
· Dimensions: 17.5W x 24H x 15D in. (445 x 610 x 381 mm)
· 1 year warranty
|
||||||||||||||||||||||||||||||||||||
ProBlot™ 12 Hybridization Oven Now Only $2,900!
See LabValues 2002 details - Here
Item H1200A - Use promo code 2LV-1.22 for discounted pricing - Valid through December 31, 2022
This promo cannot be combined with other promotions or discounts. Institutional pricing not valid. All terms apply.
ProBlot™ Hybridization Ovens/Shakers
- Two models for medium to high throughput
- Precise temperature control and stability for reproducible results
- Variable speed and adjustable axis rotisseries
- Optional rocking platform and additional rotisseries
The ProBlot™ 6 and 12 meet the needs of medium to high throughput laboratories with their 6 and 12 bottle capacity.
The rotisserie and incubation system in the ProBlot™ ovens provides the perfect conditions for consistent results with low background. Mechanical convection creates an extremely uniform environment by circulating air through the chamber while heat input is controlled by a microprocessor. An integral viewing area in the door allows for sample visualization without disrupting the interior temperature. The desired agitation level is obtained with the variable speed and adjustable axis rotisserie.
Oven chambers are corrosion resistant stainless. ProBlot™ 6 and 12 have a grounded interior electrical outlet for powering small equipement. The ovens are provided with a rotisserie for 35 mm diameter bottles and 50 ml disposable tubes, a drip tray, two large bottles and a pack of hybridization mesh. A rocking platform and other rotisseries are available.
Specifications
|
|
ProBlot™ 6 |
ProBlot™ 12 |
|
Bottle Capacity |
6
large | 12 small |
12
large | 24 small |
|
Rotisserie/Rocker Speed |
4 to
20 rpm |
4 to
20 rpm |
|
Temp Range |
Amb.
+5° to 80°C |
Amb.
+5° t to 80°C |
|
Temperature Control |
Microprocessor |
Microprocessor |
|
Temp. Resolution/Uniformity |
0.1°C/0.5°C |
0.1°C/0.5°C |
|
Exterior Dimensions |
19 x
17.5 x 19.5 in. |
19 x
17.5 x 19.5 in. |
|
Chamber Dimensions |
14.5
x 11 x 13.5 in. |
14.5
x 11 x 13.5 in. |
|
Weight |
59
lb | 26.8 kg |
59
lb | 26.8 kg |
|
Electrical* |
120 V~,
60 Hz |
120 V~,
60 Hz |
*Other voltages available upon request.
Web Content Viewer
Actions