Specifications

Temperature Range	Ambient +5° to 60°C
Temperature Increments	0.1°C
Temperature Uniformity	± 0.4°C*
Temperature Stability	0.1°C
Temperature Accuracy	0.1°C
CO2 Range	0 to 20%
CO2 Increment	0.10%
CO2 Accuracy	± 0.1%
CO2 Sensor	Dual Beam IR
Chamber Dimensions (45L)	13.2 x 14.2 x 15.4 in. / 33.5 x 36.1 x 39.2 cm
Chamber Dimensions (180L)	18.7 x 20.8 x 28 in. / 47.3 x 52.8 x 71 cm
Chamber Volume	45L / 180L
Chamber Material	Stainless Steel (316)
Exterior Dimensions (45L)	16.5 x 18.3 x 21.8 in. / 42 x 46.5 x 55.3 cm
Exterior Dimensions (180L)	22 x 26.2 x 37.2 in / 56 x 66.5 x 94.5 cm
Weight (45L)	77 lbs / 35 Kg
Weight (180L)	172 lbs / 78 Kg
Electrical	120V or 230V, 50-60Hz (350W)
Warranty	2 years

PLUS Models Only

High Heat Decon	125°C for 8 hours
Humidity Control	Up to 95%
Split Inner Door Compartments	45L: 2 / 180L: 6

 

• Digital control of temperature and CO2
• Personal sized, 13 x 14.5 in. footprint (20 L)
• Accepts bottles and flasks up to 2 L
• Includes 2 stainless steel shelves
• Dual beam, infrared sensor

At only 13 inches wide, the PR1MA™ Mini CO2 Incubator is the smallest and most economical incubator for applications requiring CO2 gas control. Its small footprint makes the incubator ideal for use inside of biological safety cabinets, isolating sensitive cultures or for any laboratory simply trying to conserve bench space. With a thick layer of high efficiency insulation surrounding the chamber, the incubator is also ideal for transportation of cells. Once power has been disconnected, the incubator maintains temperature levels within 10% of the set parameter for up to 1 hour*. In addition each model includes a 12V vehicle power adapter for operating the instrument in a car, boat, etc.

Both temperature and CO2 percentage are digitally adjustable and displayed in real time on the large LED control panel. This panel also features a “Cal” function, for easy in-lab calibration of the temperature or CO2. In addition, humidity (up to 80%) can be added to the chamber by inserting the included (stainless steel) humidity reservoir.

The CO2 level is constantly monitored using dual beam infrared sensing technology. In the event of a drop in CO2, audible and visual alarms are triggered, notifying the user of the error. Despite its small size, the incubator features a relatively large 20 L chamber with the capacity for flasks and bottles up to 2 liters. Two removable, stainless-steel shelves are included. The shelves are perforated to improve airflow within the chamber. * If disconnected from the CO2 supply, CO2 percentage decreases by approx. 1%/30 min.

Specifications

Temperature Range	Room Temperature -10°C to 55°C
Temperature Accuracy	0.25°C (at 37°C)
Temperature Uniformity	0.5°C (at 37°C)
Temperature Increment	0.1°C
CO2 Range	0 to 20%
CO2 Sensor	Dual beam infrared
CO2 Accuracy	0.1% (at 5%)
Humidity	70 to 80%
Exterior Dims. (W x D x H)	13.2 x 14.5 x 18.7 in.  33.5 x 37 x 47.5 cm
Interior Dims. (W x D x H)	10.3 x 9.3 x 12.8 in.  26 x 23.5 x 32.5 cm
Capacity	20 L | 0.7 Cu Ft
Weight	15 lbs | 6.5 kg
Electrical	100 to 240V, 50-60 Hz
Warranty	2 Years

SCO2W CO
2 Incubator, Water Jacket, 1.5 Cu Ft, IR, HEPA, 115 V

Model SCO2W water jacketed CO
2 incubator and is an ideal benchtop unit for cell culture applications. It provides a precisely controlled, accurate, pure environment throughout the culturing process. Shel Lab CO
2 incubators are designed to provide the uniform temperatures and highly stable CO
2 environments that are necessary to prevent shocks to cells. Need more space? This unit is also available in 5 cu.ft /143 L (Model SCO5W).

Standard Design Features:

• Infrared (IR) CO
  2_Sensor is extremely quick to recover CO
  2 levels after door openings and ensures superior pH stability
• Unique water jacket design provides excellent temperature uniformity of +/-0.2°C at 37°C
• Humidity levels maintained through evaporation of up to 95%
• Data logging capabilities
• Designed to minimize contamination; includes:
• Patented copper-caged HEPA filter
• Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
• Durable stainless steel chamber with coved corners for easy cleaning
• Exclusive heated copper CO
  2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber
• Copper shelving option
• Autoclavable shelving system
• Industry best warranty- 5 years parts and labor in the USA, 7 years on the IR sensor

SCO10A CO2 INC, AJ, HEPA, 10 CU FT, STACKED, 115 V

Model SCO10A is a stacked version of our SCO5A incubator and is ideal for sensitive tissue and cell culture applications. It provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations.

Standard Design Features:

• Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability
• Unique air jacket design provides excellent temperature uniformity of +/-0.25°C at 37°C
• Humidity levels maintained through evaporation of up to 95%
• Data logging capabilities

Designed to minimize contamination; includes:

• Patented copper-caged HEPA filter
• Heated door to ensure superior temperature uniformity and reduce the potential for condensation to form on the inner glass door
• Durable stainless-steel chamber for easy cleaning
• Exclusive heated copper CO2 inlet to prevent moisture from being introduced into the chamber
• Copper shelving option
• Autoclavable shelving system
• Industry best warranty - 5 years parts and labor in the USA, 7 years on the IR sensor

 

Exterior Dimensions (W × D × H)	27.5 × 28.5 × 75.6 (699 mm × 724 mm × 1921 mm)
Interior Dimensions (W × D × H)	20.5 × 19.8 × 21.5  (521 mm × 503 mm × 546 mm)
Volume	5.0 cu.ft. (142 L)
Shelf Dimensions (W × D)	19.1 × 17.8 (485 mm × 251 mm)
Unit Weight	400 lbs (182 kg)
Interior Metal	301 SST
Exterior Metal	Painted Cold Roll Steel
Operating Temperature Range	Amb +5°C - 60°C
Temperature Uniformity - Midrange	0.25 °C
Temperature Stability - Midrange	0.1 °C
Controller Type	Digital
Display Resolution	0.1 °C
Power Voltage , Frequency & Current	110-120 VAC, 50/60 Hz, 6.0 Amps
MAX HVAC Load	2058 BTUs/hr
Safety Certifications	UL 61010-1, EN 61010-1, CSA 61010-1, CE

• Precision temperature control
• 6-sided heating, ambient +5°C to 60°C
• Heated door and door frame
• Prevents condensation
• Excellent accuracy and recovery after opening the door
• Quick recovery of temperature and CO2
• Internat microscope option
• Monitor cells on the display or remotely on a smart device

Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and CO2 control, Benchmark's SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm Incubators feature a proprietary heat distribution system that combines six-sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C).  Two chamber volumes are available - 45L and 180 L.  The 180 L model also includes options for high heat decontamination, a split glass door and oxygen gas control.

These are the first and only incubators with the optional (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in "real time". An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.  Cell viewing requires the IncuView Integrated Microscope Shelf.

Incubator specifications

Temperature Range	Ambient +5°C to 60°C
Temperature Accuracy	±0.1°C
Temperature Uniformity	± 0.4°C
Temperature Increments	01°C
Temperature Stability	0.1°C
CO2 Range	0 to 20%
CO2 Increment	0.10%
CO2 Accuracy	± 0.1%
CO2 Sensor	Dual Beam IR
Heat Decontamination	Yes, Models 180HD and 180HDO2 only
O2 Range	0.5 to 20% (180HDO2 Model ONLY)
O2 Accuracy	±0.3% (180HDO2 Model ONLY)
Chamber Dimensions 45 L (W x D x H)	13.2 x 14.2 x 15.4 in. | 33.5 x 36.1 x 39.2 cm
Chamber Dimensions 180 L (W x D x H)	18.7 x 20.8 x 28 in. | 47.3 x 52.8 x 71 cm
Chamber Volume	45 Liter | 180 Liter
Split Inner Door	6 Compartments (180HDO2 Model ONLY)
Chamber Material	Stainless Steel
Exterior Dimensions 45 L (W x D x H)	16.5 x 18.3 x 21.8 in. | 42 x 46.5 x 55.3 cm
Exterior Dimensions 180 L (W x D x H)	22 x 26.2 x 37.2 in. | 56 x 66.5 x 94.5 cm
Weight 45 L (W x D x H)	77 lbs | 35 kg
Weight 180 L (W x D x H)	172 lbs | 78 kg
Electrical	120 V or 230 V,  50-60 Hz
Power Consumption	300W (H3565-45) / 420W (H3565-180) / 700W (H3565-180HD) & (H3565-180HDO2)
Warranty	2 years

 

Microscope Specifications

Magnification	200X
Field of View	1 x 1 mm
Resolution	2 µm
Image Format	5MP (2592 x 1944 pixels)
Video Format	MPEG-4, up to 1296 x 972 10 FPS
Sample Vessels	clear flasks, dishes, plates <8 mm thick
Optics	Brightfield or darkfield
Sensor	CMOS
Electrical	5 V (powered by internal micro-USB)

CelCulture® CO2 Incubators

• Contamination control with long life ULPA filters and 90°C moist heat decontamination cycle.
• Direct heat & air jacket design with gentle yet effective forced convection.
• Intuitive interfaces and intelligent data and event logger.

The CelCulture® CO2 Incubator is designed and manufactured using the accumulated expertise and knowledge that Esco has developed with over 35 years of world class equipment for laboratory usage. Designed with sample safety, energy efficiency and user-friendliness in mind, the system achieves precise parameter controls, highly effective contamination control and intuitive user interfaces all--supported by Esco's solution-based sales and service representatives worldwide.

Key Benefits

• CelSafe™ Contamination Control System provides unparalleled protection to your precious samples
• SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 conditions.
• All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
• The incubator's main body is made from electro-galvanized steel with Esco's unique ISOCIDE™ antimicrobial coating.
• SwiftCon™ moist heat 90°C decontamination cycle operates overnight to eradicate contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use.
• CelAlert™ Alarm System reminds users of important tasks needed to protect their cultures
• CO2 tank depletion reminder in addition to CO2 tank-low alarm.
• ULPA-reminder will alert user to replace ULPA filter

VivoCell™ Precise Temperature, CO2 Control and High Humidity

• Best uniformity and control among available CO2 Incubators
• Fast CO2, temperature, and humidity recovery without overshoot.
• Direct heat design for rapid recovery, with 8 heaters grouped into 3 zones.
• Air jacket provides isolation against ambient temperature fluctuations.
• Filtered air circulates across water pan accelerating humidifying process and flows gently around culture plates, causing no disturbance to cell culture.
• Blower automatically stops when door is opened, to minimize mixing of chamber and room air. VentiFlow™ forced convection. accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination.

Easy-to-Clean

• Chamber is made of stainless steel chamber with rounded corners enabling efficient and rapid cleaning.
• Ductwork, plenums and shelves are removable without tools for faster and easier operator maintenance.
• Glass door and inner gasket are removable without tools

Series CB | CO2 Incubators with Hot Air Sterilization and Heat Sterilizable CO2 Sensor

• Maximum usable space with minimal footprint and excellent ease of use
• Minimum risk of contamination thanks to uncompromising hot-air sterilization
• Fanless, easy-to-clean hygienic interior
• Stable pH values thanks to drift-free CO2 IR sensor technology
• Low evaporation of the medium due to high levels of humidity and quick recovery time

Main Features

• Temperature range: from +4 °C above ambient temperature up to +60 °C
• Humidity range: up to 95% RH
• O2control range: 0.2 to 20 vol% O2 for versions with O2 control
• Auto-sterilization with hot air at +180 °C
• Double-pane humidification system with condensation protection
• CO2 gas mixing jet with Venturi effect
• Hot air sterilizable CO2 sensor with infrared technology
• Intuitive touchscreen controller
• Internal data logger, measured values can be read out in open format via USB
• Lockable door handle
• Tightly sealed inner door made of tempered safety glass
• Seamless stainless-steel inner chamber
• 3 perforated stainless-steel shelves
• Units are stackable with stacking adapter
• Troubleshooting system with visual and acoustic alarms
• Computer interface: Ethernet
• Zero-voltage alarm contact

The BINDER CB series CO2 incubator is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A BINDER CB series CO2 incubator can perform complex cultivation experiments as well as specific environmental conditions.

CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor
The Binder CB series is a world first! Fitted with a sterilizable CO2 sensor, the incubator meets the highest of standards when it comes to sample safety and cell growth. While C series CO2 incubators have been designed with standard laboratory applications in mind, the BINDER CB comes highly recommended for the incubation of delicate cells, providing optimum growth conditions for cell cultures.

Just like the C series units, the CO2 incubators in the CB series have the option of automatic sterilization with hot air at 180 °C. Plus, they have a heat sterilizable CO2 sensor with infrared technology and come with a double-pan humidification system with condensation protection. The units feature tightly sealed inner doors made of tempered safety glass and a lockable door handle, guaranteeing maximum safety conditions for work in the laboratory.

CO2 incubators with a patented humidity management system
CB series CO2 incubators have a patented humidity management system. The Permadry double-pan humidity system provides active humidity limitation that keeps even the interior walls dry. What's more, evaporation is kept to a minimum thanks to the high humidity.

These CO2 incubators are incredibly user-friendly, with the option to control all of the key parameters at once using the operating panel. Measured values are recorded continually and can be exported as data sets with ease via USB. Navigation is straightforward and intuitive.

The CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor are ideal for the incubation of delicate cells, guaranteeing optimum conditions for cell cultures along with high levels of safety and usability.

Operating features

• 5°C above room temperature to 70°C
  
• Microprocess PID control/ Auto-tuning/ Calibration
  
• Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
  
• Over-temperature limiter/ Door opening alarm
  
• 3 different temperature values memorable 
  
• Digital LED display (0.1°C resolution) with touch-sensitive keypads
  
• RS-232 interface available
  

  Constructional features

• Fully insulated dual-wall door with rubber magnetic seal gasket keep setting temperature. 
  
• Stackable two high using the stacking kit.(optional)
  
• Optimized sample inspection through a tempered inner glass door without affecting chamber temperature.
  
• Separable Detachable shelves and rounded inner chamber corners for easy cleaning.
  
• Highly durable incoloy heating element with fins that guarantee better radiation.
  
• Attach other electric instruments to the inside of the chamber through a side cable port.
  
• Cable port allow for control of the amount of airflow in the chamber.
  (dia 38mm/1.5°C, Provided silicon or rubber cap)

   

  Specifications

  Model IB-05G IB-15G IB-25G Chamber volume(L/cu ft) 60 / 2.1 102 / 3.6 151 / 5.3 Temperature Range(°C/°F) Amb. +5 to 70 / Amb. +9 to 158 Fluctuation1)(±°C/°F)at 37°C 0.1 / 0.18 0.1 / 0.18 0.2 / 0.36 Variation1)(±°C/°F)at 37°C 0.6 / 1.08 0.2 / 0.36 0.6 / 1.08 Dimension Interior dimensions (W x D x H) (mm/inch) 400x360x420 / 15.7x14.2x16.5 480x410x520 / 18.9x16.1x20.5 610x460x540 / 24.0x18.0x21.3 Exterior dimensions (W x D x H) (mm/inch) 595x555x745 / 23.0x22.0x29.0 675x605x855 / 27.0x24.0x34.0 805x655x885 / 32.0x26.0x35.0 Net weight(Kg/lbs) 45 / 99 55 / 121 62 / 136 Electrical Requirements (230V) 50/60Hz, 1.3A 50/60Hz, 2.2A 50/60Hz, 3.1A Cat. No. AAH21162K AAH21172K AAH21182K Electrical Requirements (120V) 50/60Hz, 2.8A 50/60Hz, 4.6A 50/60Hz, 6.4A Cat. No. AAH21166U AAH21176U AAH21186U

  1) Technical data (according to DIN 12880)

   

Series CB-S Solid.Line | CO2 Incubators with Hot Air Sterilization

Benefits

• Minimum risk of contamination thanks to +180 °C hot air sterilization
• Stable pH values thanks to drift-free CO2 IR sensor technology
• High humidity up to 95% RH
• Simple and fast cleaning thanks to a seamless inner chamber

Important characteristics

• Temperature range: +6 °C above ambient temperature to +50 °C
• Humidity range: 90 to 95% RH
• Auto-sterilization with hot air at +180 °C
• Humidification system with condensation protection
• CO2 gas mixing jet with Venturi effect
• CO2 sensor with infrared technology
• LCD to display temperature and CO2 along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB
• Tightly sealed inner door made of tempered safety glass
• Seamless stainless-steel inner chamber
• Perforated shelves, stainless steel
• Units are stackable with stacking adapter
• Troubleshooting system with visual and acoustic alarms
• Computer interface: Ethernet
• Zero-voltage alarm contact
• Can be stacked with CB model of the same size

Series CB-S incubators are suitable for routine cell cultivation applications: They are free from contamination due to 180 °C hot-air sterilization and reliable pH stability thanks to the drift-free infrared CO2 measurement system.

C series incubators: CO2 incubators with hot air sterilization
BINDER CO2 incubators provide optimum growth conditions for a range of cell cultures. The units guarantee an impressively low risk of contamination and are quick and easy to clean. Plus, thanks to their low running costs, BINDER CO2 incubators make for a sound investment.

C series CO2 incubators feature excellent growth conditions for cell cultures, having been designed for standard applications in the cell laboratory. The proven APT.line™ air jacket system and Permadry technology keep the incubator interior free from condensation, while the 180 °C hot air sterilization can be relied upon to ensure that bacteria and germs are killed, giving you maximum protection against contamination in the CO2 incubator.

CO2 incubators with hot air sterilization that are easy to clean
The incubator design features a seamlessly deep-drawn inner chamber and rounded corners, making it incredibly easy to clean. The two-part rack frames without screws add to this, while also ensuring that the incubator is user-friendly. When C series CO2 incubators are stacked on top of one another, you get an optimum ratio between stand space and usable space and 340 liters of incubation capacity, leaving you to carry out your laboratory work comfortably and efficiently.

Incredibly straightforward and efficient to use, C series CO2 incubators from BINDER provide ideal, reproducible growth conditions for cell cultures. Thanks to the hot air sterilization, spores and bacteria can be killed as necessary, and cells and tissue can be cultivated safely.