Lab Essentials

These high quality, impule heat sealers are the #1 selling sealers in the U.S. Each unit is pre-tested and warranted, guaranteeing efficiency, dependability, and longevity. They are ideal for a multitude of applications in the laboratory, pharmaceutical, and medical fields. The AIE-200C and AIE-300C models are equipped with a sliding cutting blade to cut excess material 1/4" from the seal. All units make excellent air and watertight seals on the following materials:

Polyethylene	Pliofilm	P.V.A.
Polyurethane	Kel-F	Tivac
Polyvinylchloride	Polyflex	Saran
Polypropylene	Mylar	Nylon
And all other heat sealable materials.

Collapsible body saves valuable storage space

Useable with crushed or dry ice

Inner-lid access port for enhanced temperature retention

Attached handle for easy transportation

Molded grip on base for pouring

BioBucket™ is a general laboratory container that every lab could benefit from. Its collapsible nature makes it the ideal container for any lab looking to conserve storage space. BioBucket™ can be used as an ice bucket to keep samples cool over long periods of time, or as portable liquid container. The attached handle makes transportation a breeze while the molded base grip allows for easy pouring and cleaning. The BioBucket™ is perfect for field use as an environmental sample collection and transport receptacle.

DuraSeal™ Sealing Film

• Durable, heat-resistant, solvent-proof laboratory sealing film
• Chemically resistant
• Heat resistant & Microwave compatible
• Tight sealing
• Tear resistant

DuraSeal’s™ superior heat-resistant feature allows for containers to be incubated in boiling water baths without suffering the characteristic melting of paraffin-based alternatives. DuraSeal™ is polyethylene based and free of any adhesives.

DuraSeal™ is easy to use. There is no inter-leaf paper to strip away, just stretch the film symmetrically over a container opening and the 1.5mil thick film contracts inwardly around the opening or neck of the container to provide a drum-tight, water-proof seal. The film can be elongated 500-800% before breakage. The film clings to itself, especially after stretching so the free edges of the film may be stretched around the container to secure the container edges.

Permeability Information:

Oxygen = 125cc/100in2/24hrs at 23°C

Carbon Dioxide = 1300cc/100in2/24hrs at 23°C

Water Vapor = 1.0g/100in2/24hrs at 38°C and 90% R.H.

DuraSeal Cling is a heat resistant, solvent-proof laboratory stretch film that can be used on a wide range of vessels.

IT CLINGS- Film can cling to itself and glass vessels.

HEAT RESISTANT- Softens at 100°C

STRONG-Film can stretch 300-400 % before breaking or tearing

TIGHT SEALING-Forms an air tight barrier when stretched across openings

VERSATILE-Compatible in more applications than Parafilm

TWICE AS LONG-Twice as long as Parafilm rolls

Comparison to Parafilm

Characteristic	DuraSeal Cling	Parafilm
Temperature Resistance	Softens above 100°C	Softens at or below 68°C
Chemical Resistance	Resists essentially all solvents	Dissolves in carbon tetrachloride, chloroform, phenol, ethyl, benzene, hexane, etc.
Stretchability	Stretches 300-400 %	Stretched 200%
Packaging	No interleaf paper	Interleaf paper must be removed prior to use

Container Seal sealing Film can be used for sealing microplates, lids, caps and other lab items.

CONFORMITY- Tape stretches, conforms and seals the irregular perimeter of plates and dishes

WATERPROOF & CHEMICALLY RESISTANT- Tape and adhesive resist most solvents and caustic agents

TEMPERATURE RESISTANT- Seal remains flexible in moderate freezer temperatures and withstands intermittent exposure to 100°C

SIZES-Available in .75" or 1" widths in red, white or yellow. All rolls 108' long.

PetriSeal stretches and conforms to form a tight seal and is temperature resistant, waterproof and chemically resistant. It resists abrasion and puncture and blocks vapor loss while reducing the rate of gas exchange. Use PetriSeal with microtiter plates, Petri dishes and culture plates to prevent to entry of contaminants. The seal remains flexible down to -30°C and can withstand continuous exposure from -40°C to +77°C (with intermittent exposure up to 100°C). Tests have shown that PetriSeal leaves no adhesive residue even after two years.

Tape Size: 0.50" x 108'

Ideal Use: Petri dishes

Colors: Blue, Clear, Red, White & Yellow

U of M: Roll

Flasks-Small Erlenmeyer (Polycarbonate)

229821 | 229825 | 229829

• Designed for mammalian suspension culture applications as well as bacterial & yeast culture
• Vent with over-sized vent area feature 0.22 µm hydrophobic membrane which allows for improved gas exchange without contamination
• Avoid contamination with single-use, pre-sterilized flasks
• Lightweight material is easier to handle than glass
• Flasks include molded graduation lines
• Individually bagged for easy storage and handling
• Medical grade virgin Polycarbonate is autoclavable

Flasks-Large Erlenmeyer and Fernbach (Polycarbonate)

229850 | 229855 | 229860 | 229865 | 229870 | 229875

• Designed for mammalian suspension culture applications as well as bacterial and yeast culture
• Packaged sterile in individual bags for easy storage and handling
• 70 mm opening for easy filling and dispensing
• Over-sized vent area in cap for improved gas exchange
• Fernbach flask shape increases surface area to volume ratio
• Baffled bottom option improves mixing and aeration

Square Media Bottles

• Media Bottles are ideal for media prep and storage of laboratory reagents and biological buffers
• For use in stem cell, mammalian, and bacterial culture applications
• Flat surface polyethylene (HDPE) caps are ideal for marking
• Manufactured from medical grade virgin PETG which reduces gas permeability
• RNase, DNase and Pyrogen free

VOLUMETRIC FLASKS, CLASS A, WITH SNAP CAP, BATCH CERTIFIED

• Durable, machine-blown body
• Heavy beaded tubing neck
• Feature a sharp graduation line and large white block letters
• Plastic snap cap is included
• Meets Class A specifications per ASTM E288

 

ITEM #	CAPACITY (ML)	TOLERANCE (± ML)	PLASTIC CAP NUMBER
FG5580-50	50	0.05	3
FG5580-100	100	0.08	4
FG5580-200	200	0.10	5
FG5580-250	250	0.12	5
FG5580-500	500	0.20	5
FG5580-1000	1000	0.30	6
FG5580-2000	2000	0.50	8

PIPETTES, MEASURING (MOHR), CLASS A, BATH CERTIFIED

• Made from borosilicate glass in compliance with ASTM specification E1293
• Color coded
• Calibrated to deliver
• Printed with durable amber markings

 

  WARNING:  Cancer and Reproductive Harm  www.P65Warnings.ca.gov

 

ITEM #	CAPACITY (ML)	GRADUATION INTERVAL (ML)	TOLERANCE (ML)	COLOR CODE
PM7059-A	0.1	0.01	± 0.006	White
PM7059-B	0.2	0.01	± 0.006	Black
PM7059-D	1	0.10	± 0.010	Red
PM7059-F	2	0.10	± 0.010	Green
PM7059-H	5	0.10	± 0.020	Blue
PM7059-I	10	0.10	± 0.030	Orange
PM7059-J	25	0.10	± 0.050	White

BEAKERS, LOW FORM, BOROSILICATE GLASS

• Made from low-expansion borosilicate glass
• Feature heavy and uniform wall thickness
• Easy pouring spouts
• Beaded Tops
• 20mL and larger have double graduated metric scale and a marking area
• Beaker tolerance is approximately +/-5%

 

ITEM #	CAPACITY (ML)	GRAD. RANGE (ML)	GRAD. INTERVAL (ML)
BG1000-10	10	N/A	N/A
BG1000-20	20	5-15	10
BG1000-30	30	5-25	10
BG1000-50	50	10-40	10
BG1000-100	100	20-80	10
BG1000-150	150	20-140	20
BG1000-250	250	25-200	25
BG1000-400	400	50-300	25
BG1000-600	600	100-500	50
BG1000-1000	1000	100-900	50
BG1000-2000	2000	200-1800	200
BG1000-3000	3000	250-2500	250