• "Mini" sized, 9 x 7 inch footprint
• Capacity for 32 x 0.2 mL or 4 PCR Strips
• Intuitive touch screen control

"Mini sized" doesn't have to mean a sacrifice on features and performance. PR1MA's™ LD032 Mini Thermal Cycler offers advanced programming features, easy to use software and fast, reliable cycling but with a smaller block and lower price point.

Designed for lower throughput needs, the LD032 Mini Thermal Cycler has a capacity for 32 x 0.2 mL tubes. The wells are arranged in a 4 x 8 format, allowing the block to accept strips of 8 as well as individual tubes. The block heats and cools very quickly - at rates as fast as 5°C/second. A proprietary algorithm controls block temperature, bringing samples quickly to the target temperature without any over- or under-shoot. Excellent block uniformity ensures consistency sample to sample.

Operation of the thermal cycler is controlled from the large, full color, touch screen. Icon driven menus allow users to get running quickly. Programming is extremely simple and includes options for time and temperature increment/decrements, adjustable ramp rates, and an auto pause and restart functions. More than 100 typical programs can be stored in memory and easily recalled. After a run, samples can be held at 4°C. An on-screen report is also available at the completion of a run.

The heated lid is self-adjusting - the spring loaded platen in the lid comes firmly into contact with the tops of the tubes to prevent sample evaporation and condensation. There are no knobs to turn or levers to adjust. The temperature of the heated lid can be changed, or the heating function of the lid may be turned off.

With a footprint less than that of the average laboratory notebook, the LD032 Mini Thermal Cycler will fit almost anywhere. Its reduced capacity block and economical price make the TC-32 Mini Thermal Cycler the perfect choice for lower throughput laboratories and educational facilities.

Specifications

Capacity - 0.2ml tubes	32
Capacity - 8 x 0.2ml PCR strips	4
Temp. Control Range	0° to 99°C
Temp. Control	Simulated sample or block
Accuracy/Uniformity	± 0.25°C | ± 0.25°C
Ramp Rate	Heating: 5°C / Sec. (max) Cooling: 5°C / Sec. (max)
Lid Temp	30°C to 112°C, user adjustable
Program Memory	Over 100 typical programs
Increments/Decrements	Yes, both time and temperature
Power Failure Restart	Yes
Power Supply	Universal,100 to 240 V, 50 to 60  Hz
Dimensions	7.2 x 9.2 x 6.2 in. | 18.2 x 23.2 x 15.7 cm
Weight	6.4 lbs. | 2.9 kg
Warranty	2 years

Model A6 Millipede Wide Gel Electrophoresis System

Gel Size: 23cmW x 25cmL
Footprint: 38cmW x 35cmL x 11cmH
Running Buffer Volume: 3000ml
Great for High Throughput Laboratories

The Owl Millipede horizontal A6 wide system offers a simple, convenient and fast method for screening multiple samples on a single agarose gel. 25 to 500 samples can be run simultaneously on one gel; producing clear, tight banding patterns with no "smiling". 

The Millipede incorporates Owl's end gate casting design. Each side of the UVT gel tray is fitted with gasketed end gates which provide a leakproof seal without tape. Built in leveling ensures the casting of flat, uniformly thick gels. Sample loading is greatly enhanced using micro well pipette format combs (and a multichannel pipette) engineered specifically for use with this system. Using these combs and a multichannel pipette, samples may be loaded directly from a 96-well plate, 8 or 12 at a time. Sample loading with a multichannel pipette speeds up transfer and reduces the chance of sample order error.

Comb Options
Catalog Number	Comb Type	Number of Teeth	Thickness of Teeth	Width of Teeth	Recommended Loading Volumes
					0.25cm	0.5cm	0.75cm	1.0cm
D3-MT2C	Micro Well	50 (2X)	1.0mm	3mm	2µl	8µl	14µl	19µl
D3-MT2D	Micro Well	50 (2X)	1.5mm	3mm	3µl	12µl	20µl	29µl
D3-MTC	Micro Well	25 (1X)	1.0mm	7.5mm	6µl	20µl	34µl	48µl
D3-MTD	Micro Well	25 (1X)	1.5mm	7.5mm	8µl	30µl	51µl	72µl
D3-WALL	Wall	1	1.5mm	230

Complete System Includes:

• Buffer Chamber with Three Point Leveling Base
  
• SuperSafe Lid with Attached Power Supply Leads
  
• U.V. Transmissible (UVT) Gel Tray with Gasketed End Gates
  
• 4 Combs: (2) 25 Well and (2) 50 Well, 1.5mm Thick
• 3 year warranty

Model A3-1 Gator Wide Gel Electrophoresis System

Gel Size: 23cmW x 40cmL
Footprint: 32cmW x 53cmL x 11cmH
Running Buffer Volume: 4.5L
Largest System Available Great for Plant Genomics

The Owl Gator horizontal A3-1 wide system can run from 25 to 600 samples on one gel. The gel can be cast in varying lengths to help conserve agarose when fewer samples need to be run utilizing a wall comb. This unit comes with built in buffer exchange ports to allow for buffer recirculation on extended runs, if needed. The large number of comb slots gives you sample and resolving distance flexibility.

The Gator incorporates Owl's end gate gel casting system. The UVT gel tray incorporates gasketed end gates which provide a leakproof seal without tape. Built in leveling ensures the casting of flat, uniformly thick gels. Sample loading is greatly enhanced using micro well pipette format combs (and a multichannel pipette) engineered specifically for use with this system. Using these combs and a multichannel pipette, samples may be loaded directly from a 96-well plate, 8 or 12 at a time. Sample loading with a multichannel pipette speed transfer and reduces chance of sample order error.

Comb Options
Catalog Number	Comb Type	Number of Teeth	Thickness of Teeth	Width of Teeth	Recommended Loading Volumes
					0.25cm	0.5cm	0.75cm	1.0cm
D3-MT2C	Micro Well	50 (2X)	1.0mm	3mm	2µl	8µl	14µl	19µl
D3-MT2D	Micro Well	50 (2X)	1.5mm	3mm	3µl	12µl	20µl	29µl
D3-MTC	Micro Well	25 (1X)	1.0mm	7.5mm	6µl	20µl	34µl	48µl
D3-MTD	Micro Well	25 (1X)	1.5mm	7.5mm	8µl	30µl	51µl	72µl
D3-WALL	Wall	1	1.5mm	230

Complete System Includes:

• Buffer Chamber with Three Point Leveling Base
  
• SuperSafe Lid with Attached Power Supply Leads
  
• U.V. Transmissible (UVT) Gel Tray with Gasketed End Gates
  
• 4 Combs: (2) 25 Well and (2) 50 Well, 1.5mm Thick
  
• Built in Buffer Exchange Ports
• 3 year warranty

Gel Size: 20cmW x 25cmL
Footprint: 28cmW x 37.5cmL x 11cmH
Running Buffer Volume: 2.3L
Most Flexible Sample Options

The Owl Gator horizontal A2 large system is a simple, convenient and fast system for detailed DNA/RNA analysis on multiple samples. This system offers the widest variety of comb options and when used with a wall comb you can cast varying length gels to conserve agarose.

The Gator incorporates Owl's end gate casting system design. Each side of the UVT gel tray is fitted with a gasketed end gate which provides a leakproof seal without tape. Built in leveling ensures the casting of flat, uniformly thick gels. Sample loading is greatly enhanced using micro well pipette format combs (and a multichannel pipette) engineered specifically for use with this system. Using these combs and a multichannel pipette, samples may be loaded directly from a 96-well plate, 8 or 12 at a time. Sample loading with a multichannel pipette speeds transfer and reduces the chance of sample order error. Comb slots on the UVT gel tray are positioned so that you can arrange two, three or four sample sets to run equal lengths on the same gel.

Complete System Includes:

• Buffer Chamber
  
• Three Point Leveling Base
  
• SuperSafe Lid with Attached Power Supply Leads
  
• U.V. Transmissible (UVT) Gel Tray with Gasketed End Gates
  
• 3 Combs: 16, 24, and 36 Well 1.5mm Thick
• 3 year warranty

Model A1 Gator Large Gel Electrophoresis System

Gel Size: 13cmW x 25cmL
Footprint: 21.5cmW x 37.5cmL x 11cmH
Running Buffer Volume: 1.6L
Most Practical Large Format System

The Owl Gator horizontal A1 large system has the smallest footprint of the large format device giving you a space saving device for your extended runs. This system is ideal for detailed RNA/DNA analysis. The unit runs from 8 to 100 samples on one gel. A wall comb is available for running shorter gels and conserving agarose. A programmable power inverter may be used for field reversal electrophoresis. The Gator incorporates Owl's end gate gel casting system. The UVT gel tray incorporates gasketed end gates which provide a leakproof seal without tape. Built in leveling ensures the casting of flat, uniformly thick gels. Sample loading is greatly enhanced using micro well pipette format combs (and a multichannel pipette) engineered specifically for use with this system. Using these combs and a multichannel pipette, samples may be loaded directly from a 96-well plate, 8 or 12 at a time. Sample loading with a multichannel pipette speed transfer and reduces chance of sample order error. Comb slots on the UVT gel tray are positioned so you can arrange up to 10 sample sets on the same gel.

Comb Options
Catalog Number	Comb Type	Number of Teeth	Thickness of Teeth	Width of Teeth	Recommended Loading Volumes
					0.25cm	0.5cm	0.75cm	1.0cm
A1-12C	Standard	12	1.0mm	8.7mm	7µl	23µl	39µl	55µl
A1-12D	Standard	12	1.5mm	8.7mm	10µl	34µl	59µl	83µl
A1-16C	Standard	16	1.0mm	6.1mm	5µl	16µl	27µl	39µl
A1-16D	Standard	16	1.5mm	6.1mm	7µl	24µl	41µl	58µl
A1-20C	Standard	20	1.0mm	4.5mm	3µl	12µl	20µl	29µl
A1-20D	Standard	20	1.5mm	4.5mm	5µl	18µl	30µl	43µl
A1-24C	Standard	24	1.0mm	3.5mm	3µl	9µl	16µl	22µl
A1-24D	Standard	24	1.5mm	3.5mm	4µl	14µl	24µl	33µl
A1-8C	Standard	8	1.0mm	13.9mm	10µl	36µl	63µl	89µl
A1-8D	Standard	8	1.5mm	13.9mm	16µl	55µl	95µl	133µl
A1-MTC	Micro Well	14 (1 x)	1.0mm	7.2mm	5µl	19µl	32µl	46µl
A1-MTD	Micro Well	14 (1 x)	1.5mm	7.2mm	8µl	28µl	49µl	69µl
A1-PREP	Prep	2	1.5mm	117/5mm	132/6µl	462/20µl	791/34µl	1122/48µl
A1-RL-25C	Rapid Load	25(2X)	1.0mm	2.5mm	2µl	7µl	12µl	17µl
A1-RL-25D	Rapid Load	25(2X)	1.5mm	2.5mm	3µl	11µl	18µl	26µl
A1-RL-9C	Rapid Load	9(1X)	1.0mm	7.2mm	5µl	19µl	32µl	46µl
A1-RL-9D	Rapid Load	9(1X)	1.5mm	7.2mm	8µl	28µl	49µl	69µl
A1-WALL	Wall	1	1.5mm	130mm

Complete System Includes:

• Buffer Chamber with Three Point Leveling Base
  
• SuperSafe Lid with Attached Power Supply Leads
  
• U.V. Transmissible (UVT) Gel Tray with Gasketed End Gates
  
• 3 Combs: 12, 16, and 20 Well, 1.5mm Thick
• 3 year warranty

Gel Size: 20cm(W) x 25cm(L)
Buffer volume: 1200ml

The IB56000 HR2025 is a high resolution system ideal for separation of nucleic acids  in agarose gels. It is also designed for rapid screening of PCR fragments, RFLP analysis or 
plasmid screening, field inversion, genomic DNA separations and electrophoresis  procedures requiring recirculation. Constructed of 3/8" cast acrylic to provide years of 
trouble-free service. Withstands high voltage and high temperatures and will not warp or crack like molded units do.

This System Comes Complete with:

• Buffer Tank
• Patented Vented Lid
• IB56020 UVT Casting Tray
• IB56030 Casting Fixture
• Two, 2.0mm x 20-tooth combs
• Power Cords
• Bubble Level
• Buffer Ports
• 4 year warranty

 

Specifications:

Unit Dimensions: 8.3cm(H) x 26.7cm(W) x 39.4cm(L)

Gel Dimensions: 20cm x 25cm

Maximum sample capacity: 160 samples (4 combs, 40 samples each)

Buffer Capacity: 1200ml

Distance between electrodes: 35cm

Gel Size: 25cm(W) x 25cm(L)
Buffer volume: 1500ml

This high throughput system is designed to complete analysis of up to 200 samples 
from microtiter plates and is ideal for running all types of precast gels. The large format 
can run gels in less than 30 minutes.

 

Specifications:

Unit Dimensions: 8.3cm(H) x 26.7cm(W) x 39.4cm(L)

Gel Dimensions: 25cm x 25cm

Maximum sample capacity: 300 samples (6 combs, 50 samples each)

Buffer Capacity: 1500ml

Distance between electrodes: 35cm

This System Comes Complete with:

• Buffer Tank
• Patented Vented Lid
• IB57020 UVT Casting Tray
• IB57030 Casting Fixture
• Four, 2.0mm x 50-tooth combs
• Power Cords
• Bubble Level
• Buffer Ports
• 4 year warranty

Gel Size: 10cm(W) x 15cm(L)
Buffer volume: 500ml

The MP-1015 is the ideal Multi-Purpose gel box for both extended high resolution, linear runs, and economical quick screens. The MP-1015 contains buffer recirculation ports for long runs requiring recirculation. The MP-1015 is constructed of 3/8" thick, cast acrylic, to withstand high voltages and temperature extremes. Unlike single piece molded units, the MP1015 will NOT warp or crack during extended use. This unit is designed to provide years of continuous operation.

Specifications:

Construction: Buffer tank is constructed of 3/8" thick, cast acrylic. Casting tray bottom is constructed of UV transmittance cast acrylic to allow viewing of the gel with a UV light source

Unit Dimensions: 7cm(H) x 16.5cm(W) x 30.5cm(L) Gel Dimensions: 10cm x 15cm

Shipping weight: 4.5 Lbs.

Distance between the electrodes: 27cm

Maximum Sample Capacity: 80 samples (4 combs, 20 samples each)

Buffer Capacity: 500ml

The maximum suggested applied voltage for the electrophoresis of DNA in agarose gels using the IB53000-MP1015 is 140 volts. In a 1% TBE gel, this translates into a run time of approx. 1 hour. Lower voltages can be used of course, and as a general rule a 70 volt run will take twice as long as a 140 volt run. Higher voltages can be used to decrease run time however, higher voltages can produce excessive heat and decrease sample resolution.

Complete System Includes:

• Buffer Tank

• Patented Vented Lid

• IB53020 UVT Casting Tray

• IB53030 Casting Fixture

• Two, 2.0mm x 16-tooth combs

• Power Cords

• Bubble Level

• Buffer ports

• 4 year Warranty

Gel Size: 7cm(W) x 10cm(L)
Buffer volume: 250ml

Designed for Quick Screening and rapid, linear separation of nucleic acids. The QS710 requires 
minimal set-up and provides excellent band resolution and consistent lane-to-lane mobility 
for accurate results. A versatile system great for applications requiring quick screens such as 
fragment analysis and recombinant screening.

 

Specifications:

Construction: Buffer tank is constructed of 3/8" cast acrylic.

Casting Tray bottom is constructed of UV Transmittance cast acrylic to allow viewing of gel with a UV light source

Unit Dimensions: 6.4cm(H) x 11.4cm(W) x 22.2cm(L)

Gel Dimensions: 7cm x 10cm

Distance between the electrodes = 19.3cm

Maximum sample capacity = 30 samples (2 combs / 15 samples ea)

Buffer Capacity = 250ml

Shipping weight = 3.0 lbs.

The maximum suggested applied voltage for the electrophoresis of DNA in agarose gels using the QS710 is 100 volts. In a 1% TBE gel, this translates into a run time of approx. 1 hour. Lower voltages may be used, of course, and as a general rule, a 50 volt setting will take twice as long as a 100 volt setting.

The suggested run parameters for the electrophoresis of RNA in agarose gels containing formaldehyde are 60 - 80 volts.

Complete System Includes:

• Buffer Tank
• Patented Vented Lid
• IB51020 UVT Casting Tray
• IB51025 Casting Fixture
• Two, 1.5mm x 8-tooth combs
• Power Cords
• Bubble Level
• 4 year warranty

The IBI "Lab-Pal" has been designed with the teaching lab in mind. The IB50000 utilizes  two glass slides, measuring 2" x 3", for casting the agarose. The small glass slide 
format is ideal for minimizing agarose use while still being an excellent teaching tool for students just learning about the separation of DNA molecules. 

Agarose slides can be cast days in advance and stored in buffer for later use. This helps maximize  class time

System Includes:

• Vented lid
• Dual casting fixture
• 4 glass casting slides
• (2) 1.5mm x 5-tooth combs
• Bubble level
• Power cords
• 4 year warranty

• Quickly Spin down droplets and condensation
• Use before and after thermal cycling to increase PCR yield
• Accepts skirted, Non-Skirt and all standard PCR plates
• Less than 1/4 the size of most plate centrifuges
• 1 year warranty

Capacity:	2 PCR Plates
Rotor Speed:	2500 rpm
G Force:	500 xg
Rotor:	Fixed Vertically
Dimensions (WxDxH):	7.5 x 8.2 x 7.2 in.
	19 x 21 x 18.3 cm
Weight:	6 lbs. / 3 kg
Electrical:	120V or 230V, 50-60 Hz

 

Mini Plate Spinner Adapter Supports:

• 8 x 0.2ml PCR Strips
• 12 x 0.2ml PCR Strips
• 0.2ml PCR Tubes
• 48 well PCR Plates