S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
For Fast and Efficient Microplate Sealing
SealPlate® SealMate™ Rolls for Fast and Efficient Microplate Sealing
The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated film.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded green band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
Item#:
ASSEALMATEROLLS
For More Secure Seal to Minimize Evaporation
General Purpose Sealing Film For a More Secure Seal to Minimize Evaporation
General Purpose polypropylene films offer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Ideal for use with polypropylene plates.- Certified DNase- & RNase- free
- Features good chemical resistance
- Provides a very secure seal to minimize evaporation, but is slightly harder to remove than SealPlate films
- Less rigid polypropylene film reduces aerosols upon removal
- Specially formulated adhesive minimizes plate residue
- Can be used as a temporary seal while awaiting further processing
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
Temperature Range
- -40°C to +120°C
Industry Standard for Sample Protection
SealPlate® Sealing Film - The Industry Standard for Sample Protection
SealPlate® minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells).
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary economical seal while awaiting further processing
- Features two end-tabs with perforations
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
Thick Adhesive, Leaves No Residue Behind
eXTReme™ 2 Seal Extra Strong Sealing Film
Extra strong adhesive minimizes evaporation without residue eXTReme Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.
Product Info
Application: PCR and robotics
Temperature Range: -20°C to +120°C
Temperature Range: -20°C to +120°C
Product Info
- Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
- Certified DNase- & RNase- free
- Next-generation adhesive formula provides better than-ever sample protection with improved evaporation rates
- Standard cut is ideal for use with raised-rim and non-skirted PCR plates
- Large cut is designed for greater plate coverage and easier positioning of the film to the plate
- Large cut is recommended for use with flat-top, semi skirted and full-skirted PCR plates as well as deep well plates
- NOT recommended for qPCR
Easy-to-pierce, Medical Grade Acrylic Adhesive
AlumaSeal® II™ Easy-to-pierce Aluminum Foil Seal
AlumaSeal® II™ is a soft non-permeable aluminum foil with a strong, medical-grade acrylic adhesive. Compared to other aluminum foils, AlumaSeal® II™ has less tendency to roll back on itself when removing the backing paper.
- Certified DNase- & RNase- free
- Excellent chemical resistance (e.g. DMSO)
- Easily pierceable with single or multichannel pipettors and robotic probes
- 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well
Applications
- PCR
- Long-term storage
- Light sensitive assays
- Robotics
Temperature Range
- -80°C to +120°C
Helpful Tips
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
FoilSeal™
Extra thick aluminum foil minimizes shredding upon removal
FoilSeal features a specially formulated adhesive that provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage.
Application: PCR, light sensitive assays and robotics
Temperature Range: -20°C to +120°C
Universal fit for all plate types (e.g. flat-top, raised-rim and non-skirted); the smaller dimensions and rounded corners result in no plate overhang for robotics applications.
- Certified DNase- & RNase- free
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- 2.0mil aluminum foil removes easily without shredding or tearing
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- Not recommended for long-term storage
Helpful Tips:
- Remove diagonally from a corner to prevent tearing
Item#:
ASFOILSEALTM
Optically Clear, Pressure Activated, Non-tacky Silicone
For a limited time, purchase any TS-RT2 or TSS-RTQ (100qty) and get a 20% discount!
Offer valid July 1st to October 1st 2022
This promo cannot be combined with other promotions or discounts. All terms apply.
ThermalSeal® RTS™ Optically Clear, Pressure Activated, Non-tacky Silicone Adhesive
The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process.
- Provides an extremely strong seal to minimize evaporation
- Certified DNase- & RNase- free
- Chemically resistant to DMSO, acetonitrile, and methanol
- Ideal for use with flat-top, raised-rim and non-skirted PCR plates
- High optical clarity and low auto-fluorescence
- Available in roll format for automation: ThermalSeal® RTS™ Roll-Seal
- A complimentary sealing paddle is included in each box
Applications
- qPCR
- Long-term storage
- Protein crystallography
- HPLC
- -80°C to +105°C
Helpful Tips
- Sufficient pressure must be applied to activate the silicone adhesive
- Multiple swipes of the sealing paddle in both directions is highly recommended
- A 10 minute or greater wait period before thermal cycling increases the film-to-plate bond
Please know that the manufacturer has suspended manufacturing this product indefinitely.
We suggest purchasing PR1MA PCR Plastics.
Contact your rep or email tech@midsci.com for more information.
Platemax CyclerSeal Sealing Film
- Provides exceptional seal to safeguard samples during transport or storage
- Eliminates well to well contamination and cross-over in PCR applications when used with Axygen's compression mat
- Polypropylene film is wide temperature range compatible, -40° to 104°C
- PCR-TS is designed for ELISA/EIA applications
- PCR-TS-900 is twice as thick (as PCR-TS) and is suitable for water-bath and other difficult PCR applications
Item#:
ASPCRFILM5
- Provides exceptional seal under the widest temperature conditions and reagents
- Wide temperature range compatible, -80° to 104°C
- Ideal for light sensitive samples and PCR or storage
- Uniform adhesive provides optimum well sealing
- PCR-AS-200 is pierceable
- 100 films/pack
Item#:
ASPCRFILM4
AccuSeal Semi Automated Plate Sealers from MIDSCI are engineered and constructed by Labnet International, Inc to maximize PCR, assay and storage applications with a user friendly panel and automated sealing options.
Great emphasis has been placed on incorporating a wide range of standard heights to deep well microplates with appropriate adaptors to efficiently fit the plates for consistent temperature regulation. The AccuSeal sealer is optimized for simple digital control and operation, user-friendly versatility and convenience as well as safety.
Controls and Operation:
- Intuitive layout permits optimal sealing time, temperature and settings
- Includes a "No Heat" setting for pressure sealing applications
Versatility and Convenience:
- Adaptors specific for a PCR plate or an assay plate accommodates a variety of fits
- Automatically adjusts heat for different height plates
- Provides uniform pressure for a quality seal with special non-stick coating to prevent messy cleanup.
Safety:
- Motorized drawer features safety switches and prevents injury to the user.
Specifications:
Dimensions |
6.75x12.75x14.25 inches |
Weight |
24 Lbs |
Sealing Temperature |
OFF, 100 to 190 °C |
Temperature Accuracy |
+/- 1.00 °C |
Temperature Uniformity |
+/- 1.00 °C |
Sealing Time |
0.5 to 10 sec |
Compatible Plate Materials |
PP (Polypropylene) |
Compatible Plate Types |
Standard Assay Plates |
Maximum Plate Height |
45mm |
Compatible Sealing Film Types |
Foil-polypropylene laminate |
Adapters
| PS1000-PCR | AccuSeal PCR plate adapter for sealing PCR and 384 well plates |
| PS1000-ADAPT | AccuSeal Assay plate adapter for sealing assay plates |
Catalog Number |
Description of Sealing Film |
PS100-GP111 |
|
PS1000-GP300 |
|
PS1000-100 |
|
PS1000-150 |
|
PS1000-200 |
|
PS1000-300 |
|
PS1000-400 |
|
Item#:
ASPCRFILM8
For Sealing One Row of a 98-Well Plate
1x8 FilmStrips™ for Sealing Only One 8-well Row of a 96-well Plate
Designed for use with either 1×8 strip-well ELISA plates or standard 96-well plates where rows must be selectively protected or accessed. Ideal for COVID-19 testing to seal a row of 8 wells after swabs are deposited into a deep-well plate.- Certified DNase- & RNase- free
- A pliable polypropylene film minimizes aerosols upon removal
- Each sheet contains 8 strips on a continuous liner for ease of use
- Apply individually or two-at-a-time
- Use as a secondary film to seal previously pierced wells or to prevent accidental pipetting
Applications
- General laboratory use
- Incubation
- ELISA
Temperature Range
- -40°C to +120°C
Item#:
AS1X8FILMSTRIPS
SmartSeal™ Semi-Automated Microplate Sealer
The Accuris SmartSeal™ Automated Plate Sealer provides fast, reproducible sealing of microplates. Unlike manual plate sealing, the SmartSeal ensures uniform sealing of all wells and consistency from one plate to the next.
- Fast, reproducible sealing of well plates
- Adjustable time, temperature and pressure for optimized sealing
- User friendly controls, load plate and press run to seal
- Accepts a wide range of plate types and heights, including deep well storage plates, assay plates, pcr plates, etc.
The Accuris SmartSeal™ Automated Plate Sealer provides fast, reproducible sealing of microplates. Unlike manual plate sealing, the SmartSeal ensures uniform sealing of all wells and consistency from one plate to the next.
With digital control over all parameters (time, temperature and pressure) the SmartSeal is capable of accepting a wide range of plate types and heights. An aluminum block adapter is included (for assay and PCR plates) increasing the compatibility of the instrument to allow for sealing nearly any plate up to 48mm tall.
With sealing times as low as 5 seconds, the SmartSeal is a time saving solution for labs and production facilities requiring high quality and consistent plate sealing.
Compatible with:
- Deep well (storage) plates up to 48mm tall
- Assay plates
- PCR Plates (skirterd, semi-skirted and non-skirted)
- Polypropylene polystyrene or Polyethylene plates
- Foil or polymer (transparent) seals
Specifications:
| Model | Accuris SmartSeal |
| Temp. Range: | 80°C to 200°C |
| Temp. Accuracy: | 1°C |
| Sealing Time: | 0.5 sec. to 10 sec. (0.1 sec. increments) |
| Max. Plate Height: | 48mm |
| Dimensions | 17.8 x 37 x 33 cm / 7 x 14.6 x 13 in. |
| Weight: | 9.5 kg / 21 Lbs |
| Electrical: | 115V or 230V, 50-60Hz, 300W |
Item#:
ASSMARTSEALTM
Web Content Viewer
Actions