S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Test Tubes and Racks
From test tubes and racks to the labels and boxes you’ll use them with. MIDSCI has got your needs covered.
MIDSCI has a wide assortment of test tubes, including top-notch centrifuge tubes your research depends on. We carry everything from sterile centrifuge tubes that we promise won’t buckle during spins to specialty centrifuge tubes that are completely blacked out to preserve your light sensitive compounds.
We also have freezer racks and autoclavable racks, stackable storage boxes and freezer boxes, general storage containers and cryogenic storage refrigerators and tanks.
And let’s not forget the labels! Wash-off labels, removable labels, and labels that will never come off (if you need that).
There are so many other quality choices and options for all of these products.
Color Coded Dual Tough-Tags will not come off in rotors, cyclers or racks. They are resistant to extreme temperatures and the matte surface is suitable for pencil, pen or marker.
Label Size: 1.25" x 0.5625" with 0.44" spot (32mm x 14mm with 11mm spot)
Ideal Use: 1.5ml tubes
Colors: Blue, Green, Red, White and Yellow
U of M: 500 sets/roll (a set is one spot and one rectangular label)
Cryogenic Labels
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers can be a challenge when storing in temperatures below 20 degrees Celsius.
We offer with a high-quality adhesive that can stick to already frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below 80 degree Celsius and as low as 196 degrees Celsius. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI's Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive let the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder coated metal and iron.
Providing a high quality of the Cryo label is essential for laboratories,
researchers, (etc.). It will provide fewer errors, better accuracy, more
proficiency, and all of this leads to better results at a better budget.
These come on a roll ready for your use in a lab!
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryo labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
- Makes your color coded tape easily accessible
- Clean cut every time
- Available for 1 and 3 core sizes
- Strong and durable
- Metal and plastic options available
Whether utilizing anesthesia labels in the operating room or using tape to batch wrap culture
plates in the research laboratory, a medical tape dispenser provides easy access to whatever
color coding tape you use with a quick pull and a clean cut.
MIDSCIs multiple tape dispensers provide a well-organized means of storing a rainbow
assortment of color coding tape with no need to worry about different core sizes and widths.
Each of our multiple medical tape dispensers allow the user to easily change out an empty roll
of tape without switching out the entire dispenser, making them easy to use AND efficient!
Our label sheets are specially designed to permanently accept laser printing.
Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.
Label Size: 1.625" x 0.625" (41mm x 16mm)
Ideal Use: General Purpose
Sheet Layout: 4 across - 16 down
Labels/Sheet: 64
Color: White
U of M: 1,600/pack
Our label sheets are specially designed to permanently accept laser printing.
Label Size: 0.875" x 0.875" (22mm x 22mm)
Ideal Use: Microscope Slides
Sheet Layout: 8 across - 12 down
Labels/Sheet: 96
Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack"
U of M: 2,400/pack
Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red and Yellow
Please give us a call for a sample.
How to set up your laser tags
Label Size: 2.50" x 0.50" (64mm x 13mm)
Ideal Use: 0.5 to 2.0mL tubes
Sheet Layout: 3 across - 20 down
Labels/Sheet: 60
Color: White
U of M: 1,500/pack
How to set up your laser tags
Label Size: 1.50" x 0.75" (38mm x 19mm)
Ideal Use: 1.5 to 2.0 mL tubes
Color: White, Blue, Green, Orange, Red, Yellow, or "Rainbow Pack"
U of M: 1,500/pack
Cryogenic Labels
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers can be a challenge when storing in temperatures below 20 degrees Celsius.
We offer with a high-quality adhesive that can stick to already frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below 80 degree Celsius and as low as 196 degrees Celsius. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI's Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive let the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder coated metal and iron.
Providing a high quality of the Cryo label is essential for laboratories,
researchers, (etc.). It will provide fewer errors, better accuracy, more
proficiency, and all of this leads to better results at a better budget.
These come on a roll ready for your use in a lab!
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryo labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Our label sheets are specially designed to permanently accept laser printing.
Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.
Label Size: 1.28" x 0.50" (33mm x 13mm)
Ideal Use: 1.5mL tubes
Sheet Layout: 5 across - 17 down
Labels/Sheet: 85
Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack"
U of M: 2,125/pack
Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red and Yellow
Please give us a call for a sample.
Tough-Tags® are perfect for accurately identifying important samples stored in tubes, microplates or boxes that will be autoclaved or stored in moderate freezer temperatures.
Web Content Viewer
Actions