Laboratory Labels

FrostGrip Cryogenic Storage Labels for Frozen Vials & Tubes

Our label sheets are specially designed to permanently accept laser printing.

Label Size: 1.50" x 0.25" (38mm x 6mm)

Ideal Use: Microplates

Sheet Layout: 4 across - 39 down

Labels/Sheet: 156

Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack"

U of M: 3,120/pack

Rainbow Pack includes 4 sheets of each color: Blue, Green, Orange, Red and Yellow

Watch a video on: How to set up your laser tags

Cryogenic Labels

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers can be a challenge when storing in temperatures below 20 degrees Celsius.

We offer with a high-quality adhesive that can stick to already frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below 80 degree Celsius and as low as 196 degrees Celsius. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI's Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive let the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder coated metal and iron.

Providing a high quality of the Cryo label is essential for laboratories, researchers, (etc.). It will provide fewer errors, better accuracy, more proficiency, and all of this leads to better results at a better budget.

These come on a roll ready for your use in a lab!

Tough-Tags® are chemically inert labels that strongly adhere to microtubes, test tubes, storage boxes and other microscope slides. They are temperature resistant from 121°C to 40°C and withstand autoclaving, boiling water baths, freezer temperatures, organic solvents and caustic agents. For best adhesion it is recommended that siliconized surfaces be avoided. 

Tough-Tags® are perfect for accurately identifying important samples stored in tubes, microplates or boxes that will be autoclaved or stored in moderate freezer temperatures.

Specialty Tough Spots on a Roll are now available for specialty applications, such as identifying hazardous or radioactive samples.

TEMPERATURE RESISTANT- From -196°C to 80°C

SAVE TIME-Preprinted Tough-Spots make labeling and identifying samples quick and easy. Use the numbered tough-spots to identify a series of samples, no handwriting or printing needed.

COLOR CODED-Each color coded Tough-Spot has a distinctly different color to identify similar samples and also includes a white area to clearly write a quick note about it.

SAFETY-Lab safety is always a top priority. Use the Biohazard or Radioactive Tough-Spots to identify tubes or other vessels containing hazardous materials.

Syringe Flag Vaccine Labels

• Identify the vaccine type at a quick glance with the color-coded flag and large text
• The portion of the label that adheres to the syringe is clear, allowing the user to easily identify what it is in the syringe
• A space is provided for the time the vaccine was administered to be handwritten on the label
• Made in the USA

Material:  Mylar with Clear Laminate

Adhesive:  Permanent

Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to â40°C.  These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.

Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

Label Size: 0.94" x 0.50" (24mm x 13mm)

Ideal Use: 0.5ml tubes

Color: White, Blue, Clear, Green, Orange, Red or Yellow

U of M: 1,000/roll

Please give us a call for a sample.

Labels for Moist, Frosty or Frozen Surfaces 

-"Grips" to wet, frost-covered and frozen surfaces 
-Temperature resistant to -80°C 
-Compatible with centrifuge rotors 
-Resistant to chemicals and solvents 
-Adheres to plastics, glass, metals and even paperboard boxes 
-Available in white laser sheets for use printing in any laser printer (GRLA items), white direct thermal rolls (GRRL items), or white hand writable rolls (GRDT items)

Color Coded Dual Tough-Tags will not come off in rotors, cyclers or racks.  They are resistant to extreme temperatures and the matte surface is suitable for pencil, pen or marker.

Label Size: 1.25" x 0.5625" with 0.44" spot (32mm x 14mm with 11mm spot)

Ideal Use: 1.5ml tubes

Colors: Blue, Green, Red, White and Yellow

U of M: 500 sets/roll (a set is one spot and one rectangular label)

Cryogenic Labels

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers can be a challenge when storing in temperatures below 20 degrees Celsius.

We offer with a high-quality adhesive that can stick to already frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below 80 degree Celsius and as low as 196 degrees Celsius. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI's Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive let the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder coated metal and iron.

Providing a high quality of the Cryo label is essential for laboratories, researchers, (etc.). It will provide fewer errors, better accuracy, more proficiency, and all of this leads to better results at a better budget.

These come on a roll ready for your use in a lab!