• Transparent, nontoxic and inert
• Precise, uniform drop size
• Shatter-proof and unbreakable
• Can be used with LN2 (-196° C)
• Heat Sealable

These unbreakable, one-piece pipettes eliminate contaminated rubber bulbs, broken glass and exposure to infectious materials. They are made of ultra-clear, low density polyethylene (LDPE) and are ideal for microbiology, blood banking, hematology, immunology, and urinalysis. Sterile pipettes are excellent for tissue culture application. Their low-affinity surface reduces sample, cell or protein loss.
 
Whether you make your selection based on length, build draw, pipette capacity or number of drops per ml, one of these ten designs is likely to be suitable for your application. Some have ultra-fine extended tips (P4113, P4117,P4121, P4122, P4133) that allow for extremely precise dispensing and access into the narrowest vessels. They can also be heat sealed for airtight sample storage. Their uniform drop size can be used for reproducible spotting of gels & TLC plates, and for dispensing into test plates, ID strips, PCR tubes or 96 well plates.
 

Item #	Description	Quantity
P4111-00	5 mL Large Bulb, Graduated, non-sterile, Bulk	250
P4111-11	5 mL Large Bulb, Graduated, sterile, Individually Wrap	500
P4111-14	5 mL Large Bulb ,Graduated, sterile, 20/pk	500
P4113-00	5 mL Large Bulb Graduated to 1ml, Bulk	250
P4113-11	5 mL Large Bulb Graduated, Individually Wrapped	500
P4114-00	7 mL Graduated to 3ml Large Bulb, Bulk	250
P4114-11	7 mL Graduated to 3ml Large Bulb, Individually Wrapped	500
P4114-14	7 mL Graduated to 3ml Large Bulb, 20/pk	500
P4115-00	5 mL Graduated to 2ml Blood Bank, Bulb	250
P4115-11	5 mL Graduated to 2ml Blood Bank, Individually Wrapped	500
P4115-14	5 mL Graduated to 2ml Blood Bank, Bulb, 20/pk	500
P4117-00	3 mL Graduated to 1ml Short Bulb, Bulk	250
P4117-11	3 mL Graduated to 1ml Short Bulb, Individually Wrapped	500
P4121-01	1.5 mL Small Bulb Extended Tip, Bulk	500
P4121-11	1.5 mL Small Bulb Extended Tip, Individually Wrapped	500
P4122-01	5 mL Capacity, Extended Tip, Std Bulb, Bulk	500
P4122-11	5 mL Capacity, Extended Tip, Std Bulb, Individually Wrapped	500
P4123-01	7 mL Capacity, Extended Tip, Large Bulb, Bulk	400
P4123-11	7 mL Capacity, Extended Tip, Large Bulb, Individually Wrapped	500
P4132-00	4 mL Capacity, Short Stem, Bulk	250
P4132-11	4 mL Capacity, Short Stem, Individually Wrapped	500
P4132-14	4 mL Capacity, Short Stem, 20/pk	500
P4133-00	4 mL Capacity, Bulk	500
P4133-11	4 mL Capacity, Individually Wrapped	500

Suspension Cell Culture Non-Treated Multiple Well Plates

• Plates are labeled with alpha-numeric markings for easy identification of individual wells
• Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination
• Lids have a stacking feature for added stability when handling tall stacks of plates
• 1 Well Plate has the same footprint as standard multiple well plates and is useful for high volume and robotic screening of DNA libraries and manual plating; it is also suitable for dot-blotting bacterial clones on 11.4 x 7.3cm (4.5 x 2.875in) nylon membranes
• 4 well plate is a smaller footprint option which offers well size similar to that of a 24 well plate, but has expanded well spacing to reduce cross contamination
• 384 Well Plates are ideal for automated applications, colorimetric assays, compound storage or small volume applications

Petri (Non-treated Cell Culture Dishes)

• Cell Culture Dishes are available in Tissue Culture Treated and Non-treated Cell Culture versions
• Petri (Non-treated Cell Culture Dishes) have thicker and more durable plastic than standard Petri Dishes  both can be used for the same applications
• 60, 70 and 100mm dishes available with a pronounced grip ring for improved handling
• Vented lids contain molded spacers to allow gas exchange

 

Non-Treated Suspension Cell Culture Flasks

• Non-treated Suspension Culture Versions
• Uniform hydrophilic surface ideal for consistent cell attachment
• Convenient zip-closure bag is a practical alternative to folding and taping open bags
• Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers
• Stable base enables filling with flask standing upright
• Thick, durable walls
• Flask is printed with lot number and expiration date for easy identification and tracking
• Molded, interlocking T design for improved stacking on 75, 182, & 300cm² and 250, 600 & 850mL size flasks
• Vent caps feature 0.22µm hydrophobic membrane
• 182cm² flask offers more growth area than standard 175cm ² flasks
• 182cm² Deep Volume Flask has extra depth, allowing more media volume; you can leave cell cultures to grow for longer without drying out or depleting all nutrients (maintain your cell cultures over the weekend)

Part Number	Product Description	Pack Description	Qty/Case
229500	25mL Suspension Culture Flask - Vent Cap, Sterile	10/Re-sealable Bag	200
229510	50mL Suspension Culture Flask - Vent Cap, Sterile	10/Re-sealable Bag	200
229520	250mL Suspension Culture Flask - Vent Cap, Sterile	5/Re-sealable Bag	100
229530	600mL Suspension Culture Flask - Vent Cap, Sterile	5/Re-sealable Bag	40
229540	850mL Suspension Culture Flask - Vent Cap, Sterile	3/Re-sealable Bag	18

Accuris SmartReader™ UV-Vis Microplate Reader
 
The Accuris SmartReader™ UV-Vis Microplate Reader (model MR9610) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols.

• Intuitive, 10-inch color touch screen control panel
• Accepts both 96 & 384-well plates
• Monochromator-based system
  • No filters required
  • Wavelength range from 200 to 1000 nm
• Stand-alone design
  • No PC or special software required
  • USB port for flash drive data transfer

Disposable Spreaders

• Spread cultures and liquids evenly

• Smooth-edges – minimize “gouging”

• 3 configurations: “L”, “T”, or Triangle

• Ideal for bacterial CFU Counts

• Pre-sterilized – no flaming required

All versions are supplied in sterile packaging, but are also autoclavable and have smooth, rounded edges to prevent unwanted cutting, scraping or gouging of agar during inoculation.  

L-Shape: 

The original spreaders are ideal for spreading bacteriological cultures evenly. The shape allows the user to rotate and apply easily throughout an entire round plate or dish. They are made of ABS and have a slight upward curve at the edge to prevent dragging or scraping.  

T-Shape:

This shape ensures that consistently even pressure can be applied across the entire span of the 34 mm spreading surface. Designed for spreading and dispersing liquids across the surface of agar culture plates, they are made of ABS and commonly used for CFU plate counts on water, milk, urine, etc.  

 

Triangle Shape:

This new design is also used for CFU count applications, but has a grooved handle that improves grip and orientation. Made of polypropylene, they are available with a 30 mm span or an extra large 60 mm span.

Our Inoculating Loops and Needles are smooth and flexible to facilitate uniform, smooth streaking without damage to media/gel surfaces. The needles are straight and suitable for removal of single colony specimens. The loops are extra-smooth and constructed of polypropylene and rubber. Both the loops and needles are packed sterile in safe, tamper-proof, zip-seal resealable bags. Cross contamination due to improper sterilization is eliminated. They can be used under hoods without danger, are color coded for ease of size identification, and are extra long to reduce the risk of contamination. Certificate of conformity is available upon request.

Total Length: 22.7cm (9)

Inoculating Loops & Needles - Reusable

Inoculating Loops:

• High quality twisted nichrome wire.
• Cool rapidly and are less expensive than platinum.
• Calibrated Loops are supplied with calibration certificates based on ASM/APHA Evans Blue Dye test protocols. 

Inoculating Loop Holders:

• Nickel plated brass.
• Handles are insulated to protect the hand during use

Inoculating Handles and Loops:

• High quality twisted nichrome wire and attached to a light-weight aluminum handle.
• Handles are insulated to protect the hand during use.
• Calibrated loops are supplied with calibration certificates based on ASM/APHA Evans Blue Dye test protocols. 
  

Inoculating Needles:

• High quality nichrome wire that cools rapidly after sterilization.
• Attached to a light-weight and insulated aluminum handle

Order#	Description
Loops without Handles
L1102	Small Loop / 2.26mm ID, 25/pk
L1103	Medium Loop / 2.91mm ID, 25/pk
L1104	Large Loop / 3.57mm ID, 25/pk
Calibrated Loops without Handles
L1100	Calibrated Loop, 10ul / 4mm ID, 5/pk
L1101	Calibrated Loop, 1ul / 1.45mm ID, 5/pk
Streaker Loops with Handles
L1120	Small Streaker, Blue / 2.26mm ID, 5/pk
L1121	Medium Streaker, Green / 2.91mm ID, 5/pk
L1122	Large Streaker, Red / 3.57mm ID, 5/pk
Calibrated Streaker Loops with Handles
L1123	Calibrated Streaker 1ul / 1.45mm ID, 5/pk
L1124	Calibrated Streaker 10ul / 4mm ID, 5/pk
Needles
L1125	Teasing Needle 6" Straight, 1/EA
L1128	Micro Needle, 5/PK
Loop Holders
L1110	Brass Loop Holder, 6", 1/pk
L1111	Brass Loop Holder, 8", 1/pk

Stickers for labeling petri dishes.

PetriStickers allow for petri dishes to be labeled quickly, neatly and reliably. Made with water-resistant ink, substrate and adhesives and will remain firmly attached at temperatures from 42° to 4°C. Simply remove the label's protective backing and apply it to the back of a petri dish. After labeling, the dish can be held in a comfortable position for streaking or colony transfer, stored in an incubator or refrigerator, and photographed.

U of M: 36/pack

Formats: 32, 50, 70 & 100 Square Grids