Pall® 47 mm Magnetic Filter Funnels

• Unique Magnetic Seal Allows Easy, One-Handed Vacuum Filtration of Liquids
• No-leak magnetic seal allows one-hand operation.
• Polyphenylsulfone construction is compatible with anti-foaming agents and many other solvents.
• Convenient. 150 mL size allows for easy fit into small autoclaves and 500 mL size is ideal for filtration of large samples.
• Sturdy and safe. Polyphenylsulfone construction provides durability and added safety at a cost less than most glass funnels.
• Forceps access point allows easy filter retrieval.
• Graduated at 50 mL increments for accurate sample measurement.
• New 47 mm Sentino® Magnetic Filter Funnels also available.
• #8 stopper with proper bore hole size included

Pall® Acrodisc® 13 mm Syringe Filters

These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media.

• Wide range of filter media available
• Available in 0.2 µm for UHPLC applications
• Available with prefilter for difficult to filter samples
• Color coded for easy identification
• Available with Minispike outlet to prevent "air bubble" lock in autosample vials and NMR tubes

Polypropylene housing with female Luer inlet and male slip outlet connections.

Some models feature a GxF borosilicate glass prefilter, which provides two to four times the throughput of standard glass fiber prefilter devices, allowing for quick and easy filtration of difficult-to-filter samples.

Available media options:

1. wwPTFE (water wettable) membrane has wide chemical compatibility, fast flow rates, low protein binding, and low levels of UV-absorbing extractables.

2. PVDF membrane has excellent compatibility with aggressive acids and alcohols.

3. PES (hydrophilic polyethersulfone) membrane is available in a special ion Chromatography design or with a GxF prefilter.

4. Hydrophilic Nylon membrane has excellent compatibility with esters, bases, and alcohols, and requires no prewetting.

5. Hydrophobic PTFE membrane with polypropylene support offers exceptional chemical and temperature compatibility and is ideal for gas, organic solutions, air filtration, or venting.

Certifications: All membranes are HPLC certified for low levels of UV-absorbing extractables.

Pall®  AcroPrep™ Advance 96-well Filter Plates for DNA Purification

• Maximum Yields of High-Quality DNA
• Optimized for maximum binding yield of DNA from a variety of sample types
• New well geometry results in reduced hold-up volume and higher recovery of DNA
• New outlet tip geometry provides direct flow of samples into receiver plate without concerns of cross-contamination
• Enhanced membrane ensures high yields of contaminant-free DNA for downstream applications
• Manufactured in accordance with SBS guidelines, allowing entire DNA purification process to be performed on automated equipment

Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration

• Provides rapid, efficient separation of biomolecules
• Omega™ membrane provides high recovery and typically results in > 90% recovery of target biomolecules
• New well design results in faster, more uniform filtration rates across the plate with reduced hold-up volume for maximum sample recovery
• Intrinsic plate and membrane properties prevent target molecules from binding to the plate

Item	Description
8033	Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration - 350 µL, Omega 3K MWCO (10/pkg)
8034	Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration - 350 µL, Omega 10K MWCO (10/pkg)
8035	Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration - 350 µL, Omega 30K MWCO (10/pkg)
8036	Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration - 350 µL, Omega 100K MWCO (10/pkg)
8163	Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration - 1 mL, Omega 3K MWCO (5/pkg)
8164	Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration - 1 mL, Omega 10K MWCO (5/pkg)
8165	Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration - 1 mL, Omega 30K MWCO (5/pkg)
8166	Pall® AcroPrep™ Advance 96-well Filter Plates for Ultrafiltration - 1 mL, Omega 100K MWCO (5/pkg)

Pall® AcroPrep™ Advance 96-well Filter Plates for Lysate Clearance

• Prefilter Provides Efficient Clarification Highly Particulated Samples
• Integrated pre filter yields consistent filtration of samples with high levels of gross particulate
• New well geometry results in faster, more uniform filtration rates across the plate with reduced hold-up volume
• Innovative outlet tip geometry provides direct flow of samples into receiver plate without concerns of cross-contamination
• Manufactured with biologically inert materials that allow clarification of most types of lysates without loss of target molecules

Item	Description
5231	Pall® AcroPrep™ Multi-well plate lids (10/pkg)
8040	Pall® AcroPrep™ Advance 96-well Filter Plates for Lysate Clearance - 350 µL, 3.0 µm Glass Fiber/1.2 µm Supor membrane (10/pkg)
8075	Pall® AcroPrep™ Advance 96-well Filter Plates for Lysate Clearance - 350 µL, 3.0 µm Glass Fiber/0.2 Supor membrane (10/pkg)
8175	Pall® AcroPrep™ Advance 96-well Filter Plates for Lysate Clearance - 1 mL, 3.0 µm Glass Fiber/0.2 µm Supor membrane (5/pkg)
8275	Pall® AcroPrep™ Advance 96-well Filter Plates for Lysate Clearance - 2 mL, 3.0 µm Glass Fiber/0.2 µm Supor membrane (5/pkg)

Pall® Acrodisc® 25mm Syringe Filters

These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.

• Wide range of filter media available
• Available in 0.2 µm for UHPLC applications
• Available with pre-filter for difficult to filter samples
• Color coded for easy identification

Polypropylene housing with female Luer inlet and male slip outlet connections. Some models feature a GxF borosilicate glass pre-filter, which provides two to four times the throughput of standard glass fiber prefilter devices, allowing for quick and easy filtration of difficult-to-filter samples.

Available media options:

1. NEW UNIVERSAL wwPTFE (water wettable) membrane has wide chemical compatibility, fast flow rates, low protein binding, and low levels of UV-absorbing extractables.

2. PVDF membrane has excellent compatibility with aggressive acids and alcohols.

3. PES (hydrophilic polyethersulfone) membrane is available in a special ion Chromatography design or with a GxF prefilter.

4. Hydrophilic Nylon membrane has excellent compatibility with esters, bases, and alcohols, and requires no prewetting.

5. Hydrophobic PTFE membrane with polypropylene support offers exceptional chemical and temperature compatibility and is ideal for gas, organic solutions, air filtration, or venting.

For ion chromatography specific syringe filters, look for the Acrodisc® Ion Chromatography Syringe Filters page.

Certifications: All membranes are HPLC certified for low levels of UV-absorbing extractables.

Pall® Acrodisc® PSF Premium Syringe Filters

The new Acrodisc® One and Acrodisc® PSF premium syringe filters combine the benefits of a multi-layered prefiltration device with an automation-certified filter housing.

• Increased surface area for maximizing throughput
• Heat sealed membrane for reduced breakthrough
• Accurate analysis. HPLC certified for low levels of UV-absorbing extractables
• Available in 0.2 µm for UHPLC applications and with GxF (Glass Fiber) pre-filter for difficult to filter samples
• Automation Certified to ensure smooth operation and worry-free performance 24 hours a day in automated workstations
• The Acrodisc® One offers a Universal Membrane for all your analytical filtration requirements

Polypropylene housing with female Luer inlet and male slip outlet connections.

Acrodisc ONE with water wettable PTFE (wwPTFE) has a Next Generation Universal Membrane for all sample types with fast flow rates, low protein binding, and low levels of UV-absorbing extractables. Avoid the expense and inconvenience of keeping a variety of filters on hand, it is a versatile filter for aqueous and aggressive organic solvent-based solutions.

Other Acrodisc® PSF filter membrane options:

• PVDF membrane has excellent compatibility with aggressive acids and alcohols.
• PES membrane is available in a special Ion Chromatography design or with a GxF prefilter.
• Nylon membrane has excellent compatibility with esters, bases, and alcohols, and requires no prewetting.
• Hydrophobic PTFE membrane offers exceptional chemical and temperature compatibility and is ideal for gas, organic solutions, air filtration, or venting.

The Acrodisc® One and Acrodisc® PSF GxF syringe filters provide two to four times the throughput of standard prefilter devices for particulate-laden samples.

For ion chromatography specific syringe filters, look for the Acrodisc® Ion Chromatography Syringe Filters page.

Packaging: Syringe filters packed in cases of 200 are available in four packs of 50 or in an AutoPack™ format. The AutoPack™ format consists of eight tubes with 25 syringe filters stacked on top of each other.

Microbiology QC products to help you keep the ‘Quality’ in Quality Control
 Purchase $1000 worth of Microbiology QC products and get $500 worth of free product!

  Valid through December 31, 2022
  This promo cannot be combined with other promotions or discounts.  Institutional pricing not valid. All terms apply.

Pall® MicroFunnel™ ST Filter Funnels

• Convenient and Economical Choice for Sterility Testing Within Isolators
• MicroFunnel ST filter funnels offer an alternative to costly closed-system sterility testing when using an isolator or containment suite
• 0.45 μm GN-6 Metricel® membrane or low binding Supor® membrane provides a choice for sterility testing applications in the pharmaceutical industry
• Supor membrane is ideal for testing antibiotic solutions
• Double bagged packaging ensures easy transfer through airlock
• Simple squeeze separation design makes membrane retrieval easy
• Meets requirements of U.S., Japan, and European Pharmacopeias for sterility testing

Pall® Metricel® Black PES Membrane Disc Filters

• Contrasting Membrane for Microbiological Analysis
• Dark background provides excellent contrast for counting opaque colonies in microbiology labs
• Exclusive dot grid pattern does not enhance or inhibit colony growth
• Certified for use in the Membrane Filter (MF) Technique as described in Standard Methods for the Examination of Water and Wastewater, current edition
• Sharp contrast between black membrane and white grid line provides guidance while viewing and counting
• Available non-sterile or in individual gamma-irradiated packs (S-packs) for critical applications

Buy $1,000 worth of Pall laboratory consumables and get $500 worth of FREE product!* 

Pall® Microsep® Advance Centrifugal Devices

• Precise, Quick Recovery of Microliter Volumes
• Rapidly concentrates 0.5-5 mL sample volumes to 65–100 μL.
• Achieve 50X concentration and > 90% recovery in just minutes
• Deadstop feature prevents samples from spinning to dryness
• Versatile Omega™ membrane is available in a variety of MWCOs
• Color-coded and laser etched for easy identification

Pall® 47 mm, In-line Filter Holders

The 47 mm filter holders are designed for in-line liquid or gas filtration. They open and close easily without disturbing the filter disc.

• Designed for in-line liquid or gas filtration
• Easy open and close
• Available in a variety of materials

They are available in polycarbonate and aluminum.

For venting and air monitoring applications, the sturdy plastic construction of the lightweight polycarbonate 47 mm in-line filter holder is ideal.

For stack sampling applications, the 47 mm in-line filter holder in anodized aluminum is a durable and cost-effective choice.

For excellent chemical resistance and continuous processing of fluids at high pressure, the 47 mm in-line filter holder in stainless steel is recommended.