Lab Equipment

• Shake and incubate samples simultaneously
• Complete with platforms for tubes and plates
• Intelligent control
• Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 56 features interchangeable platforms for microtubes and microplates. Both platforms are supplied with the unit. Temperature in the VorTemp 56 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures in tubes and microplates. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 56 may also be used in the cold room for subambient applications.

Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.

A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.

The sturdy construction of the VorTemp 56 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.

Molded from a special high density polymer, these cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through slots maximize fluid exchange and ensure proper drainage. The one-piece integral lid eliminates the need for separate steel lids. The snaplatch and hinge-lock design of the UNISETTE prevent early separation of base and lid and allows for one-hand operation. Lids can be opened and closed as often as necessary and they always relock securely without danger of specimen loss. Large labeling areas are located on two sides of the cassettes. Anterior writing area is at a 35° angle. M506 Series is similar to M505 but specially designed to hold biopsy specimens during the embedding process.

Available in non-cytotoxic, non-metallic colors. Each case contains 3 dispenser boxes of 500 cassettes.

• Microprocessor Control System
• P.I.D. Temperature Control
• LED Display of Set Point and Chamber Temperature
• Interior Electrical Outlet
• Fan Assisted/Forced-Air Circulation
• TUV Certified
• 2-year Limited Warranty

Model LI20P B.O.D. Thermoelectric Cooled Incubator, 19.3 cu.ft. (300 Bottle) Capacity. Using innovative thermoelectric cooling technology, the LI20P eliminates the need for a refrigeration compressor. This means that these units use 78% less power than alternative models and reduce room air conditioning loads by 75%. They also include 75-pound capacity shelves, which eliminates sagging. These incubators meet APHA specifications for Biochemical Oxygen Demand (BOD) and include a mechanical convection system to ensure even air distribution, digital temperature set controller, over temperature limit control, and a digital temperature display.

A one amp interior outlet allows use of shakers, stirrers, roller bottles or other apparatus. Units are supplied with adjustable leveling feet.

Low Temperature Incubators are ideal for testing of sewage and wastewater, as well as other low and room temperature applications.

MIDSCI is not responsible for lost product or damages incurred to product in the case of freezer or refrigerator malfunction.

RephiLe Catalog No.: RR800Q201 
Millipore Catalog No.: QGARDT2X1

Replace Millipore QGARDT2X1, Q-Gard T2 Purification Pack (DI feed water) for Millipore Milli-Q Advantage and Milli-Q Reference system.

Product Descriptions: 
These products are designed to remove ionic and organic contaminates down to trace levels from Deionized (DI) water.

Purification Technologies:
  Ion-Exchange
  Activated Carbon
  Depth Filtration
Ordering Information:

Suitable for the following Millipore systems:
  Milli-Q Advantage
  Milli-Q Reference

This product is designed to remove large particles and organic compounds, softening water, and remove chlorine from tap water to protect the RO membranes. Purification Technologies: Activated Carbon; Anti-Scaling; Depth Filtration Suitable for the following Millipore systems: Milli-Q Direct Disclaimer third parties: All product and company names are trademarks or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY, AFS, RiOs, and ELIX are trademarks of Merck KGaA, Darmstadt Germany

The Microplate Incubator (Model 260700) provides:

• Reliable, cost effective way to incubate culture kits, microplates, petri dishes, and test tubes.
• It yields the most efficient use of space and is the least expensive incubator available.
• The heating element is located behind a panel in the back of the incubator.
• This arrangement provides uniform heat, excellent utilization of space and eliminates the risk of scorching samples placed on the chamber floor.
• The incubator has an attractive smoked acrylic plastic door
• A gray Kydex outer body
• A sturdy aluminum interior that makes clean up a breeze.
• Unit is supplied with a flat plastic Digitemp thermometer which is attached to the interior floor.
• 2 year warranty

The SSI3 has a transparent hood that lifts up via a hydraulic system so it will function in tight places. All of our shaking incubators feature stainless steel interiors which provide excellent durability and an easy-to-clean surface. Each unit has an easy-to-read LED display. The rotation platform is included with each unit and is self-centering for easy installation.

All major functions  temperature, RPM and time  have alarms that alert the user to deviations from set parameters. Overtemperature protection is provided via a safety thermostat. Digital keypad operation offers the ability to calibrate the temperature controller to a reference thermometer.

To better support the load over years of constant use, we utilize four load bearing positions for optimal weight distribution.

Features include:

• Microprocessor Control
• Load Flexibility
• Shaking Platform Included
• Independent Controls for Temperature, Timer, and Shaker
• Full Line of Shaking Accessories
• 24 Month Limited Warranty

The SHEL LAB Incubator Shakers provide a controlled environment for continuous growth of biological organisms. Market applications include microbiology, tissue culture, cell culture, and bacteriology. The SSI5 features our unique counter balance weighting system that is adjustable to accommodate off-center loads, varying capacities and stroke lengths, which in turn allows for smoother operation. The user adjustable rotational stroke accommodates different types of cells and provides maximum oxygen transfer. The unit has a small footprint and includes shelf space for static incubation during shaking.

All major functions (temperature, RPM, and time) have alarms that alert the user to deviations from set parameters. Overtemperature protection is provided via a safety thermostat. Digital keypad operation offers the ability to calibrate the temperature controller to a reference thermometer. To better support the load over years of constant use, we utilize four load bearing positions for optimal weight distribution.

Features include:

• Microprocessor Control
• Load Flexibility
• Shaking Platform Included
• Independent Controls for Temperature, Timer, and Shaker
• 1.5" Access Port
• Electrical Outlet
• Interior Light
• Full Line of Shaking Accessories
• 24 Month Limited Warranty