Replacement filters, bulbs, and cartridges designed for use with the Rephile® DirectUP and PURIST water purification systems.

PURIST ultrapure water system produces Type I ultrapure water from RO, distilled or deionized water. Product water quality meets or exceeds CLSI and CAP Type I water standards.

The system is CE and FCC certified.

Independent Ultrapure Water Dispenser

• The remote dispenser has a built-in high precision resistivity sensor with cell constant of 0.01 cm-1 to measure the quality of ultrapure water just prior to the dispensing point.
• Volumetric dispensing and calibration.
• The handle is 360 degree-rotatable and detachable from its support for effortless and instant dispensing with maximum flexibility.

Multi-functional Control Panel

• Volumetric dispensing and calibration
• Alarms and maintenance info on a large color LCD screen
• Real-time monitoring of system status:
• Product water quality/resistivity
• Cartridge/UV lamp remaining service life\

RephiQuatro U Pack

• The patented large capacity ultra-purification cartridge
  
• Minimal dead water volume
  
• Production of ion-free and organic-free ultrapure water
  
• Choices of ultra-purification cartridges for feed water Types

  Features:

  Optimal Quality

  • Preventing microbial growth with automatic system recirculation
  • Eliminating bacteria and reducing TOC to trace level by a dual wavelength UV lamp
  • Top quality water produced from large-capacity purification cartridges
  • Low running cost with guaranteed performance
  • Manufactured in an ISO9001:2008 certified facility

  Easy to Use

  • Small footprint that takes up minimal bench space
  • Flexible choices of final filters to match different needs (e.g. filters to remove bacteria / RNAse /Endotoxin etc.)
  • Ergonomic design to ensure simple installation and smooth operation
  • Minimal maintenance

   

  Applications
  A single solution to fit your various laboratory water demands:

  
  Preparation of:
  -samples
  -buffers
  -media
  -reagents

  Water used in:
  -GC, HPLC, AA, ICP-MS
  -cell culture
  -molecular biology
  -Nanotechnology

  	PURIST UV	PURIST
  Feed Water Requirements
  Feed Water	EDI water, RO water, Distilled water, Deionized water
  Operating temperature	5-45° C
  Feed water pressure	0-15psi (0-1 bar)
  Product Water Quality
  Flow rate (@25° C)	1.0-1.5 L/min
  Resistivity (@25° C)	18.2 M Ω -cm
  TOC level **	< 5 ppb	<10ppb
  Particles (>0.2µm)	< 1 /mL ***
  Microorganisms	<1 cfu/ml ***
  Pyrogens (endotoxins)	<0.001 Eu/ml (with a terminal ultrafiltration filter)
  Dimensions
  Length xDepth xHeight	205 mmx350 mmx 450 mm
  Net weight	15.4	13.2

STAT FAX 2600 Microwell Plate Washer

The Stat Fax® 2600 is a microprocessor-controlled automatic microplate washer that accepts many types of standard microplates and micro strip trays. The instrument will accept microwells having flat-, round-, or V-bottom configurations. It automatically accommodates partially filled micro strip trays. Plates may be washed in the A to H direction (8 strips of 12 wells each) or in the 1 to 12 direction (12 strips of 8 wells each) depending upon the plate orientation in the carrier and the number of wash probes on the head. Instruments are available with user changeable wash heads. The 8-wash head is standard; 12-wash head is available as optional accessories.

The instrument is fully programmable to provide multistep combinations of dispense, aspirate, combined aspirate/dispense, and timed soak cycles. Each user-programmed test can have up to 20 steps, and the instrument is capable of storing approximately 50 separate tests in non-volatile memory. As a convenience feature, the instrument can be programmed to automatically perform a rinse operation at a particular time of day. The instrument may also be used in the direct mode whereby wash operations are selected via the built-in keypad. A feature allowing user-assigned well depth may also be used, if preferred to the automatic well sensing feature. For volumes larger than the capacity of the wells, or to reduce bubbles, a top-wash feature is included so the wash solution may be aspirated off the top as it is being dispensed.

In addition to the 8-probe combination dispense/aspirate wash head, each instrument is supplied with wash, rinse, and waste bottles utilizing integral electronic level sensors, and an aerosol shield. A stainless steel bottle rack is available as an optional accessory.

Specifications:

CappWash plate washer is an ideal elisa plate washer for small scale work. Simple, compact and inexpensive. Fitting into even the tightest budget, Capp plate washer is a perfect alternative to dependence on department washers for washing micro plates and strips. Capp elisa plate washer works most effectively with a vacuum source.

Capp elisa plate washer requires no programming nor electrical wiring connections. It is made of a high-grade stainless steel and polypropylene, making it fully autoclavable and highly resistant to aggressive chemicals.

The unique Two-in-One Design of Capp elisa plate washer gives each tube 2 functions - delivery of the washing solution to the well and aspiration of the used solution back to the waste collection bottle. This is possible as each tube of Capp elisa plate washer consists of an inner tube that releases the distilled water washing solution into the wells for rinsing while the outer tube vacuums away the liquid upon completion of the washing procedure.

The washing process with Capp plate washer is as simple as it can be: Simply lower the tubes into the well then push the knob to fill and release the knob to empty. Now repeat for the desired amount of washings and move on to the next row.

Capp elisa plate washer is suitable for all well types. The plate washer can be set to the desired depth very easily by simply adjusting the two screws found on either side of the tubes

• Easy to operate
• Simple & robust design
• Manual ELISA plate washer

W-12 - CappWash plate washer 12-channel

W-12KIT-115V - CappWash Kit including W-12, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

CAPPWash Kit includes 12-channel plate washer, vacuum pump, wash-collection bottles and tubing. CAPPWash Microplate Washer is the ideal tool for small scale immune assays. Fitting into even the tightest budget, CAPPWash is a perfect alternative to dependence on department washers for washing microplates and strips.

• Easy to operate
• Simple and robust design
• Fully autoclavable

W-16KIT-115V- CappWash Kit including W-16, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

W-16KIT-230V - CappWash Kit including W-16, WP-230V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

• GLP/GMP/ISO compatible
• Automatic calibration programs
• RS232 data interface with user selectable baud rates up to 19,200
• Automatic zero tracking
• Automatic system checkout sequencing
• Built-in security bracket
• Stability indicator
• Live animal weighing
• Percent weighing
• Capacity tracker
• Microprocessor control
• Exclusive real time temperature compensation software
• Parts counting
• Check weighing
• Selectable filtering
• Multiple units of measure
• Floating TareTM (dual range models only)
• Autoranging (dual range models only)

A new, revolutionary weighing technology has recently been developed by Scientech. Since this progressive technology is so exceptional, a patent has been filed and is currently pending. In addition, this innovative technology is now the foundation for a new series of electronic balances which carry Scientech's Zeta trademark.

The heart of the new Zeta Series is based on a direct-loading, electromagnetic, force-restoration cell concept, which differs dramatically from normal lever-configuration sensor designs. Thus Zeta models have a more elegant design with fewer moving parts. The result is a more rugged balance with an easily repairable, modular sensor while preserving high performance.

In addition, each unrivaled Zeta model is handcrafted in the USA and retains all the accuracy, durability, and user-friendly standard features you have come to expect from Scientech. The benefits inherent in the Zeta Series also empower Scientech to offer you a new North American 5-year warranty backed by Scientechâs ISO9001 certification.

Replacement filters, bulbs, and cartridges designed for use with the Rephile® DirectUP and PURIST water purification systems.

• Powerful refrigeration system, Quick-Cool to 4° C in 8 minutes
• Includes easy access rotor (24 x 1.5 mL) up to 17,135 xg
• Exceptionally quiet and compact
• Optional StripSpan adapter for 0.2 mL tubes and strips
• 2 year warranty

The new Labnet Prism R is quickly becoming the benchmark in the refrigerated microcentrifuge category. In spite of its remarkably small footprint, the Prism R has a powerful brushless motor and cooling capacity to spare. The new user-friendly LCD control panel provides intuitive control over all operating parameters, including speed, time and temperature.

Speed can be set in rpm, up to 13,500 rpm in increments of 100 rpm, or rcf, up to 17,135 x g in increments of 100 x g. Operation of the centrifuge can be timed, from 0.5 to 99 minutes, or continuous. A momentary spin function is activated by pressing and holding the quick key. The powerful refrigeration system maintains temperatures as low as -10° C and is designed to reach 4° C (from room temperature) in less than 8 minutes.

The brushless motor drive quickly and effortlessly accelerates the rotor to set speed. A computer designed isolation system ensures vibration free operation, even with a slight imbalance. The Prism R is also equipped with an imbalance detection system that automatically shuts down operation in the event of a significant imbalance. Deceleration at the end of a run is attained in less than 18 seconds, yet will not disrupt samples.

The unique design of the 24 place rotor allows easy access to the tops of sample tubes. Individual tube slots in the solid aluminum rotor support the tubes along their length and contain sample in the event of tube failure. The rotor accepts 1.5/2.0ml tubes directly and smaller tubes through the use of adapters, sold separately. An optional StripSpin adapter snaps on to the top of the rotor for spinning 0.2ml tubes and PCR strips. The rotor is seated on a tapered shaft which facilitates easy removal of the rotor for cleaning and autoclaving.