S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
PR1MA Peptone, Powder

- View DNA migration and separation as it happens
- Blue light illumination - won't damage DNA
- Capture high resolution images without removing the gel from the tank
The myGel InstaView comes complete with everything needed to cast, run, and view mini electrophoresis gels, including an integrated power supply.
Gels are easily poured using the supplied trays, combs and leak-proof casting stand. One large (10.5x10cm) or one small (10.5x6cm) gel is accommodated by the gel tank.
The power supply connects directly into the gel tank. With no more leads to contend with the connection is guaranteed to be right, every time. Output voltage can be adjusted to 35V, 50V, or 100V and run time can be set for up to 99 minutes. If the lid is not properly in place a magnetic interlock between the gel tank and the lid prevents current from running through the system.
Once the system is set up, slide the mini LED transilluminator into place under the tank and at any time turn it on to view the run in real time. An array of blue LEDs emits bright blue light at a wavelength of 465nm for optimal excitation of common green fluorescent stains such as SmartGlow, SYBYR Green and Gel Green, without damaging DNA. An orange filter is incorporated into the lid for visualizing DNA bands eliminating the need for additional equipment or special glasses.
To document results, place the included gel imaging enclosure over top of the myGel InstaView and use the camera ap on any smart phone to capture high resolution images without removing the gel from the tank. Images can easily be shared via email, text, or printed.
Technical Data
Output voltage |
35V, 50V or 100V |
Timer |
0-99 mins, continuous |
Safety |
Magnetic switch |
Buffer Volume |
230ml |
Gel Capacity |
1-10.5x10cm or 1-10.5x6cm gel, 0.5cm thick |
Transilluminator |
Blue LED, 465nm |
WxDxH (w/enclosure) |
10x8.25x5in/25.5x21x14cm |
Weight |
2.3lb/1.04kg |
Electrical |
115V, 60Hz or 230V, 50Hz |
Warranty |
2-year |
InstaView Gel Tank
The InstaView Gel Tank is the perfect choice for labs that prefer to use a separate power supply. The InstaView Gel Tank accommodates one large (10.5x10cm) or one small (10.5x6cm) gel tray and is supplied with trays, combs and a leak-proof casting stand. The gel tank lid includes attached power leads which prevent the unit from operating without the lid properly in place. Any standard power supply can be connected, including the Accuris myVolt Mini and myVolt Touch.
Technical Data
Safety |
Physical interlock between lid and tank |
Buffer Volume |
230ml |
Gel Capacity |
1-10.5x10cm or 1-10.5x6cm gels, 0.5cm thick |
Transilluminator |
Blue LED, 465nm |
WxDxH (w/enclosure) |
7.5x8.25x5in /19x21x14cm |
Weight |
1.65lb/0.75kg |
Electrical |
115V, 60Hz or 230V, 50Hz |
Warranty |
2-year |
System & Accessories:
E1201 myGel InstaView Electrophoresis System, includes gel tank with orange filter, direct connect power supply, E1200-CS1 casting set (see below), Mini SmartBlue Transilluminator and imaging enclosure
E1200 - InstaView Gel Tank, includes tank with orange filter, C1200-CS1 casting set (see below), mini UV
transilluminator and imaging enclosure (power supply not included)
E1200-CS1 - Additional casting set, includes casting stand, divider, 2 trays for 10.5x6cm gels, one tray for 10.5x10cm gels, 2 double-sided combs -12/22 teeth
E1101-COMB1 - Additional double-sided combs, 12/22 teeth, pack of 2
