• Increased ultraviolet output and intensity
• No light flicker
• Wider intensity range with variable selection (select models)
• Fast lamp start up
• Universal power supply
• Reduced electrical consumption
• Longer tube life
• Lighter weight
• Improved gel visualization and gel documentation
• UVP's patented 3UV Benchtop Transilluminator provides the selection of 365nm, 302nm and 254nm in one compact unit
• 2UV models offer 302nm and 365nm UV in one model
• Easily view gels under 365nm longwave UV for extended periods of time avoiding photonicking damage. Researchers can use the 302nm midrange to increase the fluorescence for photodocumentation. Shortwave 254nm UV is used to irradiate samples
• All Benchtop Transilluminator models are compact, lightweight units
• These 8-watt models provide a low cost alternative to the High Performance UV Transilluminators
• A variety of filter area work surface sizes are available
• Hinged, clear UV blocking cover, included with each transilluminator, is adjustable for access to the filter surface
• 2 year warranty

WARNING: Transilluminators are powerful sources of ultraviolet radiation which can cause serious damage to unprotected eyes and skin. Read the ultraviolet Caution Information before operating any transilluminators.

* Except M-10 which has standard ballast, 115V unit.

Intensity :

• Select models offer single intensity other models include variable intensity. Refer to the part numbers tab for information.
• Variable intensity settings-High/Medium/Low 
  
• High setting allows for UV excitation of fluorophores on gels for routine photography. Medium is excellent for viewing and quick single-band excision. Low setting allows for positioning and preparation of gels, excising multiple bands, and focusing for photography.

UV Source: Refer to the Part Numbers tab for specific wavelengths for each model

Watts: 8 watts, except M-10 which is 6 watts

Dimensions:

• 3UV Models: 11D x 14W x 5.4H in. (279 x 356 x 137mm) 
  
• 2UV Models: 11D x 14W x 4.8H in. (279 x 356 x 122mm) 
  
• Single UV/Variable Intensity Models (Except M-10): 11D x 14W x 4.8H in. (279 x 356 x 122mm) 
  
• M-10: 7.25D x 10.25W x 4.5H in. (184 x 260 x 114mm) 
  
• Height includes UV blocking cover (all models)

Note about UV: UVP refers to its midrange UV products as 302nm. Other manufacturers may say 300nm, 310nm or 312nm. The spectral output of these units is the same as UVP's 302nm.

• Gel Tools
• Converter Plates
• BioImaging Systems

New electronic ballast and cutting-edge construction offers:

• Increased ultraviolet output and intensity
• No light flicker
• Wider intensity range with variable selection (select models)
• Fast lamp start up
• Universal power supply
• Reduced electrical consumption
• Longer tube life
• Lighter weight
• Improved gel visualization and gel documentation
• High performance 25-watt UV tubes for high fluorescence and sensitivity on stained gels
• Stainless steel cover frame provide an easy clean surface and reduces cross contamination of samples
• Uniform, brilliant back-lit fluorescence illumination is enhanced with UVP's unique background uniformity screen and UVG long-life filter
• Uniformity screen is available on units with midrange or longwave UV
• The transilluminator's powerful cooling fan maintains a low filter surface temperature to prevent sample damage and maintains a constant UV intensity
• The removable and adjustable protective UV blocking cover is included with each transilluminator
• Transilluminators carry a two-year warranty
• 2 year warranty

WARNING: Transilluminators are powerful sources of ultraviolet radiation which can cause serious damage to unprotected eyes and skin. Read the ultraviolet Caution Information before operating any transilluminators.

• Select models offer single intensity other models include variable intensity. Refer to the part numbers tab for information. 
  
• Variable intensity settings - High/Medium/Low 
  
• High setting allows for UV excitation of fluorophores on gels for routine photography. Medium is excellent for viewing and quick single-band excision. Low setting allows for positioning and preparation of gels, excising multiple bands, and focusing for photography.

UV Source: 254nm, 302nm or 365nm

Watts: 25 watts

Dimensions: All Benchtop models : 13.25D x 19.13W x 5.63H in. 

• Height includes UV blocking cover
  
• Weight: 21 lb. (9.6 kg)

Note about UV: UVP refers to its midrange UV products as 302nm. Other manufacturers may say 300nm, 310nm or 312nm. The spectral output of these units is the same as UVP's 302nm.

• Small footprint for benchtop use
• Preset and manual controls for ultraviolet or time exposures. Preset exposure delivers 120,000 microjoules or five minutes of exposure
• Microprocessor measures and control UV output, ensuring maximum energy efficiency
• Large LED display and touch panel which displays time or energy settings
• Window on the door allows viewing of the process yet blocks out the UV radiation
• Select from models with 302nm midrange UV, 365nm longwave UV or 254nm shortwave UV Interior: 12 deep x 10 wide x 5 high inches (305 x 254 x 127mm)
• Overhead UV supplies uniform UV
• Shortwave UV model is available with choice of door (CL-1000) or drawer (CX-2000) styles
• Built-in UV sensor is calibrated at the UVP factory to ensure accuracy and reliability
• Crosslinking for attaching nucleic acids to a membrane takes seconds as compared to oven baking

CL-1000 Dimensions: Exterior: 13.7 deep x 15.6 wide x 8.75 high inches (248 x 396 x 222mm)

CX-2000 Dimensions:
Exterior: 17.5"W x 15"D x 9.75"H (445 x 381 x 248mm)
Interior: 11.4"W x 11.3"D x 3.6"H (290 x 287 x 91mm)
Depth of sample tray 11.25 Width of sample tray 11.5
Sample surface to lamp approximately 3.5 in. (89mm)

1 year warranty

Cutting-edge construction of UVP transilluminators includes an electronic ballast for increased stability and reduced power consumption. They also have a compact size to fit conveniently in small laboratory spaces. Benchtop UV transilluminators feature a fast lamp start-up with no light flicker. The FirstLight UV Illuminators offer high sensitivity and <5% coefficient of variance (CV) across the full filter area for consistency across the entire illuminated surface.

The FirstLight® UV Illuminator represents a unique highly uniform excitation source for quantitative fluorescent imaging in a wide range of genomic and proteomic applications:

• Electrophoretic separation and quantiation of 1D and 2D protein separations
• Solid phase immunoassay
• DNA quantitation
• RNA quantitation

• Lamps are lightweight.
• Models available include shortwave, longwave UV or a combination shortwave/longwave version
• Combination version comes with a snap-on wavelength selector for switching between wavelengths
• Use these lamps with the J-129 Lamp Stand (pictured) or the C-10 Cabinet
• 1 year warranty
  
  Handheld Lamp Dimensions: 
  14.9"L x 3.2"W x 2.5"H
  Lamp Stand Dimensions: 9.5"H x 13"L

Shortwave XX Series Lamps use ultraviolet radiation as a reliable and effective tool for sterilization and sanitation applications in hospitals, laboratories, pharmaceutical companies, and clinics. Work surfaces and equipment can become contaminated with bacteria which may be passed through the air or by hand infecting research projects and workers. In addition to bacteria, yeast, mold spores, germs, and viruses may also be present. Shortwave XX Series UV Lamps can kill up to 99% of these organisms. Decontaminate work surfaces with UV prior to PCR to reduce air-borne contamination during DNA sequencing. UV sterilization is particularly useful for temperature sensitive applications due to low operating lamp temperatures. 

Shortwave Lamps can be used in an upward facing position for purifying the air or in a downward position for sanitizing work surfaces. Hanging the lamp (brackets provided) reduces the space required on laboratory benchtops. Longwave UV Bulbs (365nm) also available for all models. 1 year warranty

Dimensions
XX-15: 19.75"L x 6"W x 4.25"H
XX-20: 24"L x 6"W x 4.25"H
XX-40: 49.6"L x 6"W x 4.25"H
Exposure Stand: 20"L x 6"W x 13"H

• Two models (300V and 250V) available
• For DNA, RNA, or protein electrophoresis, and blotting applications
• Constant voltage or constant current with automatic crossover
• 250V model also offers a constant power operating mode
• Timed or continuous operation
• Short circuit and over current/ over voltage protection
• No load and load change detection system
• Programming includes option for automatic recovery after power failure
• 3 year warranty

The new Enduro Power Supplies meet a wide range of applications including DNA, RNA, and protein electrophoresis, blotting, and many others. Two models are available with voltage ranges to 300V and current ranges to 3000mA. Operating modes include constant voltage or constant current with automatic crossover. In addition, the 250V model offers a constant power operating mode.

All parameters, including voltage, current, power (250V model only), and time are easily set using the membrane keypad and displayed digitally on the back lit LCD. Compact in design with a small footprint, the Enduro Power Supplies are also stackable to save space. For easy viewing and setting of parameters on the bench or on a shelf, the front of the power supply can be raised with the integral folding feet.
 

Specifications 

The ENDURO Mini is a great saver of space and money. This power supply can handle up to 2 gel boxes at atime and is great for horizontal DNA gels and mini-vertical protein gels. These are small in size but not performance. The ergonomic design of the ENDURO Mini allows them to be stacked. However, to minimize cabling, up to three power supplies can be placed within the PowerStock allowing optimal air circulation while only utilizing one power outlet at the bench. These units are full featured with 300V, 400mA, 60W and built in timer. They can run at either constant voltage or constant current and have automatic cross-over as well as no-load detection.