• Powerful motor for INSTANT vortexing
• Continuous or “touch” operation
• Q-Drive™ dynamic balancing system
• Variable speed from 200 to 3200 rpm
• Wide variety of accessories

The PR1MA™ Vortex Mixer sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the PR1MA™ Vortex Mixer provides smooth instant vortexing of even the largest sample sizes, including full 50 mL tubes. The unique counter-balance system creates maximum vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation.

Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls.
 

Specifications

• Eight Position Microtube rotor
• Storage compartment for PCR rotor
• Near silent operation
• Starts and stops in seconds

The PR1MA™ Mini is a personal centrifuge that virtually fits in the palm of your hand. An eight-place rotor is included and comes installed. A second rotor for 0.2 mL PCR tubes and strips is also included and stored with the rotor removal key in a convenient compartment on the bottom of the centrifuge.

All centrifuges include the 8 x 1.5/2.0 mL microtube rotor, two position PCR strip rotor and 8 adapters for 0.5 mL tubes.

Specifications

Specifications

• Quickly spins down droplets in PCR plates (less than 20 seconds)
• Accepts skirted, non-skirted, standard, and most microtiter PCR plates
• 50% smaller than traditional centrifuges
• Unique rotor design prevents sample spillage

The PR1MA™ Microplate Microcentrifuge is the first mini sized centrifuge with a swing out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields.

The easily accessible rotor chamber includes two plate carriers that rest at a 75° angle. This allows plates to be inserted confidently without sealing tapes or caps. Upon closing the centrifuge lid, the rotor accelerates and the centrifugal force "swings" the plates into a horizontal position, concentrating any droplets on the plate walls to the well bottoms.

C2000-DWMP - This optional rotor for the PCRCENT Plate Centrifuge has carriers for deep well plates up to 35 mm tall.

Implen NanoPhotometer® NP80 Spectrometer

Accurate
Patented Sample Compression Technology™ with guaranteed fixed path lengths allows for unmatched accuracy and precision. Independent from surface tension and free from evaporation. Lifetime accuracy guaranteed.

Recalibration-free
Sealed optics without path length drift eliminates the need for costly and time consuming recalibrations. Durable, inert surfaces provide easy to clean, scratch resistant surfaces that do not require reconditioning.

Easy
NPOS Operating System: intuitive graphical user interfaces (GUI) providing one-step method access, pre-programmed and customizable applications based on the ultimate level of data security.

Flexible
Control your NanoPhotometer® via Touch Screen / Smart Phone / Tablet / PC. Equipped with Wi-Fi, USB A/B, HDMI, and LAN interface connections. Define and store your own methods.

Mobile
Spectroscopy can now be taken anywhere. The optional integrated battery pack provides up to 8 hours of stand-alone battery powered operation.

Powerful
Built-in computer with a high performance Q7 quad core 1 GHz processor and 8 GB of onboard memory provides rapid analysis and easy data storage.

Fast
Power on and instantly measure without lamp warm-up time. Full scan capability from 200 - 900 nm provides rapid and complete sample analysis in only 3.5 - 6 sec.

• The lightweight, compact Portable Pipet-Aid®
• Three-speed settings provide more precise control for both aspirate and dispense modes
• Easy access battery replacement
• EZ Grip nosepiece with double membrane filter
• Removable stand
• Holster-type wall bracket included

Specifically designed to minimize operator fatigue, the Portable Pipet-Aid XP is smaller and lightweight. It accepts most pipets from 1 to 100 mL.

Each aspiration and dispense button has three speeds, (F) Fast, (M) Medium, (S) Slow. The medium speed is suitable for most routine techniques. Fast speed can deliver up to 50 mL in 5 seconds and can be used for rapid filling of large pipets or breaking up cell clumps. Slow speed is ideal when using small pipets or when more precise delivery is required. A gravity drain model is available which substitutes a gravity drain (G) function for the fast (F) mode on the dispense button.

The XP is powered by a 9 volt (Ni-MH) rechargeable battery.

A Tissue Culture Nosepiece, which features a unique filter element, will cease to allow air to pass in either direction if it becomes wet, alerting the user to possible contamination of the rubber insert.

Size: 5.5"
Weight: 7.5 oz.
Capacity: Accepts 1 to 100 mL pipets
Battery: 9 Volt Ni-MH

Spin microtubes and PCR strips simultaneously without changing rotors!

Unlike traditional mini centrifuges, the PR1MA™ 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor™ is all that is required for running 12 microtubes and 4 PCR strips simultaneously.

 COMBI-Rotor™, for tubes and strips

• Twice the capacity of traditional mini centrifuges
• Near silent operation
• Starts & stops with closing/opening of the lid
• 1 year warranty

• Adjustable speed & tilt for a wide range of applications
• Large 14 x 12 in. work surface
• Dual platform accessory doubles work surface
• Cold room and incubator safe
• 2-year warranty

The PR1MA™ 2D is designed to provide the precise speeds and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results.
 

Specifications

• Powerful - for mixing, lysis, grinding or homogenization
• Individual homogenization tubes - avoids cross contamination between samples
• Multitask - homogenize 1-3 samples simultaneously

The BeadBug™ is a high energy benchtop homogenizer for individualized sample cell disruption to whole tissue homogenization. Simultaneous homogenization of up to 3 samples inside disposable 2ml screw cap microtubes can be optimized for grinding for 3 seconds to 3 minutes. The mixing motion causes rapid disruption through constant high velocity impact from the hardened micro-beads chosen specifically for your sample type.

Developed for samples too tough to be homogenized in a common lab vortexer, the BeadBug™ provides a convenient and economical alternative to the traditional, over-priced homogenizers on the market today. With up to a 3 tube capacity and a tiny footprint of 7x8 in., the BeadBug™ is the ideal homogenizing instrument for low to medium throughput laboratories.

Specifications

For best results, use with the BeadBug™ pre-filled tube kits: Includes 2.0 mL Non-Skirt Screw Cap tubes with caps, sealing rings and DNase/RNase-free beads as specified below:

• Large platform 18 x 18 in., up to 5 x 2 L
• TOUCH screen control over time, speed and temperature
• Exceptional temperature uniformity
• Horizontally circular 19 mm orbit for aeration & mixing
• Instantly change flask clamps with MAGic Clamp™ accessories
• Optional shelf for Petri dishes, microplates, etc.
• Incu-Shaker 10LR (Refrigerated) for temperatures down to RT -15°C
  

The Incu-Shaker™ 10L provides digitally regulated temperature with orbital mixing optimized for culturing a variety of types of cells. The standard platform (included) features a non-slip rubber coated surface ideal for TC flasks, petri dishes, and staining trays. The convenient MAGic CLAMP™ Platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.
 
Features a Touch Screen with 3 Control Views:

• Standard View
• Advanced Temperature View
• Advanced Shaker View

Specifications:

Available Platforms for IS-1010 Incu-Shaker

Flask Clamp Capacities:

• A traditional cup head for general purpose mixing of conical tubes plus it holds up to 8 microcentrifuge tubes
• Powerful motor for instant vortexing
• Continuous or "touch" operation
• Increased vortexing speed up to 3,400 rpm
• Q-Drive™ technology provides smooth vortexing action

Specifications

Accessories

• Flat and Dimpled Mats 
• 8 x 6 in. Platform 
• 24 rpm 

The Benchmark™ Mini Nutating Rocker comes with a flat cord and an 8 x 6 inch platform with dimpled and flat mats. The rocker is designed to fit inside Digital Mini Incubators (H2200-H/H220-HC). Rocker settings are fixed to 24 rpm and 20° tilt with a 1-yr warranty.