Lab Ovens and Incubators

One Model for Heating and Cooling with Accurate Temperature Control from 0° to 60°C

Overview
The myTemp 65 Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.

A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.
With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.

With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32"/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).

Features

• Accurate temperature control from 0° to 60°C
• Powerful compressor maintains 0°C
• Stainless-steel internal chamber
• Internal power outlet for shaker, mixers, etc.
• Sized for floor standing use or on bench-tops less than 32" tall

Technical Data

• Shake and incubate samples simultaneously
• Interchangeable platforms for tubes and plates
• Fine-tune Speed Control
• Rapid heating and cooling

AccuTherm is a temperature controlled vortexer that uses peltier technology to rapidly heat and cool precious samples. The combination of heating/cooling with mixing makes the AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry and clinical chemistry.

Eight interchangeable aluminum blocks accommodate PCR plates and tubes ranging in size from 0.2mL to 15mL. Designed to meet the high-paced demands of today's lab, the exceptional performance of this product make it an essential part of your daily research.

Inquire about additional accessories:
1-4000-A, 1-4000-B, 1-4000-C, 1-4000-D, 1-4000-E, 1-4000-G, 1-4000-H, 1-4000-J

STAT FAX 2200 Incubator/Mixer

The 2200 Incubator/Mixer is an economical combination incubator, timer, and shaker that
accommodates two standard microplates or strip trays. This microprocessor controlled instrument offers variable temperatures, times, and mixing speeds via the keypad. Incubation, timing, and mixing may also be used independently. A pulse mode is available. Temperatures may be set from room temperature to 40°C with a resolution of 0.1 degree. A smoke tint acrylic cover protects the plates, shields them from light, and insulates them during incubation. The enclosed system also reduces the risk of biohazard from the dispersal of aerosols.

This item has been discontinued.

Please contact your trusted MIDSCI Lab Consultant for other available options.

Standard Product Features:

• Programmable logic microprocessor controller with LCD Control Panel with message center
• 4 x 20 character LCD display
• Continuous product temperature Hi/Lo alarms, audible and visual
• Programmable ramp soak feature
• 2 levels of user password protection (set points and parameters)
• 100 event alarm logging including Date/Time Stamp and product temperatures. Stored in nonvolatile flash memory
• Integrated Hi/Lo alarm tests
• Power failure alarm
• Remote alarm contacts
• Proportional control and capacity output
• White interior, exterior, door and handle
• 5 wire shelves and bottom shelf
• 1 wire shelf adjustable
• Streamlined refrigeration design optimizes air flow and temperature uniformity
• Selectable on demand auto defrost
• Key lock door
• 2 adjustable leveling legs
• Interior light
• 1" diameter access port with plug
• 5 full width door storage compartments, 1 tilt out wire door bin
• Complete cabinet is foamed-in-place with CFC Free high density polyurethane foam insulation
• Operating temperature: -10°C to 50°C
• Warranties: 12 months parts

Performance:

Temperature Variation: ±0.6°C @ -10 to 50

The published temperature variation is derived from the maximum deviation of the thermocouple located nearest the chamber geometric center during the entire test period and divide by 2. (i.e.24.0°C min and 25.0°C max would be a variation of ± 0.5°C) Testing is based on 23.0°C, 50% RH ambient conditions and performed with type T-24 Ga. thermocouples with 1.0oz. brass slug attached. Note figures exclude defrost periods when operating at or below 2°C. Data may vary if; ambient conditions change, product load is added or other changes cause interference to chamber airflow.

External Dimensions: 32"W x 28-1/2"D x 80-3/8"H

Internal Dimensions: 20"W x 26.5"D x 57"H

20.3 cubic feet, 1 solid door

Voltage: 115V 60HZ Plug Type 5-15P

Shipping weight: 380 lbs.

Price does not include inside delivery, shipping, installation, freight, duties, insurance, and fees

FOB Hudson, WI Prices valid for 90 days

MIDSCI is not responsible for lost product or damages incurred to product in the case of freezer or refrigerator malfunction.

• Shake and incubate samples simultaneously
• Complete with shaking racks for 15ml and 50ml conical tubes
• Intelligent, digital control
• Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 1550 is supplied with interchangeable platforms for standard 15ml and 50ml conical tubes. Maximum capacity is 8 x 50mL or 18 x 15mL. Temperature in the VorTemp 1550 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures and digestions. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 1550 may also be used in the cold room for subambient applications.

Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.

A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.

The sturdy construction of the VorTemp 1550 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.