• Fast ramping - up to 5°C/second
• Intuitive graphical programming
• Lightweight and compact
• Interchangeable blocks - 24 x 0.2 ml and 18 x 0.5 ml
• Economical - half the price of a full size unit
• 18 month warranty

• Pore size from 10 µm to 50 µm
• Moisture vapor transmission rate = 4,200 g/m²/24 hr
• Easy-to-pierce with serological pipets and pipet tips for direct sample recovery
• Available in roll format for automation: AeraSeal™ Roll-Seal

SealPlate® SealMate™ Rolls for Fast and Efficient Microplate Sealing

The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated film.
 
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination.

• Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film
• Each sheet is separated by an adhesive-free, perforated, color-coded green band
• The smooth lower surface of the dispenser can be used to seal the film to the plate
• Dispenser protects unused seals from contamination
• Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
• Replacement rolls can be easily installed by releasing the locking clasps on the dispenser

• General laboratory use
• Short-term storage
• Incubation
• ELISA

• -40°C to +120°C

IBI DEPC-Treated, Nuclease-Free Water is ideally suited for all applications in molecular biology lab including PCR, RT-PCR, restriction enzyme
assays, modifying enzyme assays, transfection, cloning, transformation, and specifically for all RNA assays.

IBI DEPC-Treated Water is manufactured under stringent conditions. The purification process for this product includes continuous
deionization, reverse osmosis, UV-treatment, 0.1µm filtration, followed by steam sterilization in an autoclave. The product is re-autoclaved
to ensure the breakdown of DEPC and release of carbon dioxide that may cause the pH to shift.

• "Mini" sized, 9 x 7 inch footprint
• Capacity for 32 x 0.2 mL or 4 PCR Strips
• Intuitive touch screen control

"Mini sized" doesn't have to mean a sacrifice on features and performance. PR1MA's™ LD032 Mini Thermal Cycler offers advanced programming features, easy to use software and fast, reliable cycling but with a smaller block and lower price point.

Designed for lower throughput needs, the LD032 Mini Thermal Cycler has a capacity for 32 x 0.2 mL tubes. The wells are arranged in a 4 x 8 format, allowing the block to accept strips of 8 as well as individual tubes. The block heats and cools very quickly - at rates as fast as 5°C/second. A proprietary algorithm controls block temperature, bringing samples quickly to the target temperature without any over- or under-shoot. Excellent block uniformity ensures consistency sample to sample.

Operation of the thermal cycler is controlled from the large, full color, touch screen. Icon driven menus allow users to get running quickly. Programming is extremely simple and includes options for time and temperature increment/decrements, adjustable ramp rates, and an auto pause and restart functions. More than 100 typical programs can be stored in memory and easily recalled. After a run, samples can be held at 4°C. An on-screen report is also available at the completion of a run.

The heated lid is self-adjusting - the spring loaded platen in the lid comes firmly into contact with the tops of the tubes to prevent sample evaporation and condensation. There are no knobs to turn or levers to adjust. The temperature of the heated lid can be changed, or the heating function of the lid may be turned off.

With a footprint less than that of the average laboratory notebook, the LD032 Mini Thermal Cycler will fit almost anywhere. Its reduced capacity block and economical price make the TC-32 Mini Thermal Cycler the perfect choice for lower throughput laboratories and educational facilities.

Specifications

General Purpose Sealing Film For a More Secure Seal to Minimize Evaporation

• Certified DNase- & RNase- free
• Features good chemical resistance
• Provides a very secure seal to minimize evaporation, but is slightly harder to remove than SealPlate films
• Less rigid polypropylene film reduces aerosols upon removal
• Specially formulated adhesive minimizes plate residue
• Can be used as a temporary seal while awaiting further processing

Combo Includes:
200 μL Taq DNA Polymerase (5 units/μL)
4 x 500 μL vials of dNTP Premix (100 mM each of dATP, dCTP, dGTP, dTTP)

D118-1000

High-performance Taq DNA Polymerase specially purified to produce excellent yields with little or no background. Its outstanding activity and unique thermal DNA amplification properties make it one of the most economic DNA polymerases available.

Special Features

• Robust performance
• Leaves 3'A overhang
• Stable at all storage temperatures
• Best price/quality
• APPLICATIONS
• General PCR
• Genomic analysis
• TA cloning

D116

Ready-to-use, ultra-pure, molecular grade solution made from 100mM each of dATP, dCTP, dGTP, and dTTP stock. The PreMix is designed to reduce "hands-on" time for researchers, thereby lowering the possibility of contamination and error. Furthermore, every lot of dNTP solution is pre-tested for optimal performance. The nucleotides are supplied in sterile, doubly distilled water. Each dNTP has a final concentration of 10mM for a total PreMix dNTP concentration of 40mM.

Special Features

• Ready to use
• Each lot functionally tested
• Purity; at least >99%
• APPLICATIONS
• For RT-PCR, large PCR, and real-time PCR
• Reverse Transcription and mutagenesis