Model A1 Gator Large Gel Electrophoresis System

Gel Size: 13cmW x 25cmL
Footprint: 21.5cmW x 37.5cmL x 11cmH
Running Buffer Volume: 1.6L
Most Practical Large Format System

The Owl Gator horizontal A1 large system has the smallest footprint of the large format device giving you a space saving device for your extended runs. This system is ideal for detailed RNA/DNA analysis. The unit runs from 8 to 100 samples on one gel. A wall comb is available for running shorter gels and conserving agarose. A programmable power inverter may be used for field reversal electrophoresis. The Gator incorporates Owl's end gate gel casting system. The UVT gel tray incorporates gasketed end gates which provide a leakproof seal without tape. Built in leveling ensures the casting of flat, uniformly thick gels. Sample loading is greatly enhanced using micro well pipette format combs (and a multichannel pipette) engineered specifically for use with this system. Using these combs and a multichannel pipette, samples may be loaded directly from a 96-well plate, 8 or 12 at a time. Sample loading with a multichannel pipette speed transfer and reduces chance of sample order error. Comb slots on the UVT gel tray are positioned so you can arrange up to 10 sample sets on the same gel.

Comb Options
Catalog Number	Comb Type	Number of Teeth	Thickness of Teeth	Width of Teeth	Recommended Loading Volumes
					0.25cm	0.5cm	0.75cm	1.0cm
A1-12C	Standard	12	1.0mm	8.7mm	7µl	23µl	39µl	55µl
A1-12D	Standard	12	1.5mm	8.7mm	10µl	34µl	59µl	83µl
A1-16C	Standard	16	1.0mm	6.1mm	5µl	16µl	27µl	39µl
A1-16D	Standard	16	1.5mm	6.1mm	7µl	24µl	41µl	58µl
A1-20C	Standard	20	1.0mm	4.5mm	3µl	12µl	20µl	29µl
A1-20D	Standard	20	1.5mm	4.5mm	5µl	18µl	30µl	43µl
A1-24C	Standard	24	1.0mm	3.5mm	3µl	9µl	16µl	22µl
A1-24D	Standard	24	1.5mm	3.5mm	4µl	14µl	24µl	33µl
A1-8C	Standard	8	1.0mm	13.9mm	10µl	36µl	63µl	89µl
A1-8D	Standard	8	1.5mm	13.9mm	16µl	55µl	95µl	133µl
A1-MTC	Micro Well	14 (1 x)	1.0mm	7.2mm	5µl	19µl	32µl	46µl
A1-MTD	Micro Well	14 (1 x)	1.5mm	7.2mm	8µl	28µl	49µl	69µl
A1-PREP	Prep	2	1.5mm	117/5mm	132/6µl	462/20µl	791/34µl	1122/48µl
A1-RL-25C	Rapid Load	25(2X)	1.0mm	2.5mm	2µl	7µl	12µl	17µl
A1-RL-25D	Rapid Load	25(2X)	1.5mm	2.5mm	3µl	11µl	18µl	26µl
A1-RL-9C	Rapid Load	9(1X)	1.0mm	7.2mm	5µl	19µl	32µl	46µl
A1-RL-9D	Rapid Load	9(1X)	1.5mm	7.2mm	8µl	28µl	49µl	69µl
A1-WALL	Wall	1	1.5mm	130mm

Complete System Includes:

• Buffer Chamber with Three Point Leveling Base
  
• SuperSafe Lid with Attached Power Supply Leads
  
• U.V. Transmissible (UVT) Gel Tray with Gasketed End Gates
  
• 3 Combs: 12, 16, and 20 Well, 1.5mm Thick
• 3 year warranty

Gel Size: 20cm(W) x 25cm(L)
Buffer volume: 1200ml

The IB56000 HR2025 is a high resolution system ideal for separation of nucleic acids  in agarose gels. It is also designed for rapid screening of PCR fragments, RFLP analysis or 
plasmid screening, field inversion, genomic DNA separations and electrophoresis  procedures requiring recirculation. Constructed of 3/8" cast acrylic to provide years of 
trouble-free service. Withstands high voltage and high temperatures and will not warp or crack like molded units do.

This System Comes Complete with:

• Buffer Tank
• Patented Vented Lid
• IB56020 UVT Casting Tray
• IB56030 Casting Fixture
• Two, 2.0mm x 20-tooth combs
• Power Cords
• Bubble Level
• Buffer Ports
• 4 year warranty

 

Specifications:

Unit Dimensions: 8.3cm(H) x 26.7cm(W) x 39.4cm(L)

Gel Dimensions: 20cm x 25cm

Maximum sample capacity: 160 samples (4 combs, 40 samples each)

Buffer Capacity: 1200ml

Distance between electrodes: 35cm

Gel Size: 25cm(W) x 25cm(L)
Buffer volume: 1500ml

This high throughput system is designed to complete analysis of up to 200 samples 
from microtiter plates and is ideal for running all types of precast gels. The large format 
can run gels in less than 30 minutes.

 

Specifications:

Unit Dimensions: 8.3cm(H) x 26.7cm(W) x 39.4cm(L)

Gel Dimensions: 25cm x 25cm

Maximum sample capacity: 300 samples (6 combs, 50 samples each)

Buffer Capacity: 1500ml

Distance between electrodes: 35cm

This System Comes Complete with:

• Buffer Tank
• Patented Vented Lid
• IB57020 UVT Casting Tray
• IB57030 Casting Fixture
• Four, 2.0mm x 50-tooth combs
• Power Cords
• Bubble Level
• Buffer Ports
• 4 year warranty

Gel Size: 10cm(W) x 15cm(L)
Buffer volume: 500ml

The MP-1015 is the ideal Multi-Purpose gel box for both extended high resolution, linear runs, and economical quick screens. The MP-1015 contains buffer recirculation ports for long runs requiring recirculation. The MP-1015 is constructed of 3/8" thick, cast acrylic, to withstand high voltages and temperature extremes. Unlike single piece molded units, the MP1015 will NOT warp or crack during extended use. This unit is designed to provide years of continuous operation.

Specifications:

Construction: Buffer tank is constructed of 3/8" thick, cast acrylic. Casting tray bottom is constructed of UV transmittance cast acrylic to allow viewing of the gel with a UV light source

Unit Dimensions: 7cm(H) x 16.5cm(W) x 30.5cm(L) Gel Dimensions: 10cm x 15cm

Shipping weight: 4.5 Lbs.

Distance between the electrodes: 27cm

Maximum Sample Capacity: 80 samples (4 combs, 20 samples each)

Buffer Capacity: 500ml

The maximum suggested applied voltage for the electrophoresis of DNA in agarose gels using the IB53000-MP1015 is 140 volts. In a 1% TBE gel, this translates into a run time of approx. 1 hour. Lower voltages can be used of course, and as a general rule a 70 volt run will take twice as long as a 140 volt run. Higher voltages can be used to decrease run time however, higher voltages can produce excessive heat and decrease sample resolution.

Complete System Includes:

• Buffer Tank

• Patented Vented Lid

• IB53020 UVT Casting Tray

• IB53030 Casting Fixture

• Two, 2.0mm x 16-tooth combs

• Power Cords

• Bubble Level

• Buffer ports

• 4 year Warranty

Gel Size: 7cm(W) x 10cm(L)
Buffer volume: 250ml

Designed for Quick Screening and rapid, linear separation of nucleic acids. The QS710 requires 
minimal set-up and provides excellent band resolution and consistent lane-to-lane mobility 
for accurate results. A versatile system great for applications requiring quick screens such as 
fragment analysis and recombinant screening.

 

Specifications:

Construction: Buffer tank is constructed of 3/8" cast acrylic.

Casting Tray bottom is constructed of UV Transmittance cast acrylic to allow viewing of gel with a UV light source

Unit Dimensions: 6.4cm(H) x 11.4cm(W) x 22.2cm(L)

Gel Dimensions: 7cm x 10cm

Distance between the electrodes = 19.3cm

Maximum sample capacity = 30 samples (2 combs / 15 samples ea)

Buffer Capacity = 250ml

Shipping weight = 3.0 lbs.

The maximum suggested applied voltage for the electrophoresis of DNA in agarose gels using the QS710 is 100 volts. In a 1% TBE gel, this translates into a run time of approx. 1 hour. Lower voltages may be used, of course, and as a general rule, a 50 volt setting will take twice as long as a 100 volt setting.

The suggested run parameters for the electrophoresis of RNA in agarose gels containing formaldehyde are 60 - 80 volts.

Complete System Includes:

• Buffer Tank
• Patented Vented Lid
• IB51020 UVT Casting Tray
• IB51025 Casting Fixture
• Two, 1.5mm x 8-tooth combs
• Power Cords
• Bubble Level
• 4 year warranty

The IBI "Lab-Pal" has been designed with the teaching lab in mind. The IB50000 utilizes  two glass slides, measuring 2" x 3", for casting the agarose. The small glass slide 
format is ideal for minimizing agarose use while still being an excellent teaching tool for students just learning about the separation of DNA molecules. 

Agarose slides can be cast days in advance and stored in buffer for later use. This helps maximize  class time

System Includes:

• Vented lid
• Dual casting fixture
• 4 glass casting slides
• (2) 1.5mm x 5-tooth combs
• Bubble level
• Power cords
• 4 year warranty

• 302nm midrange UV wavelength (optimal for EtBr excitation)
• Dual intensity settings (50% or 100%)
• Hinged UV Safety cover
• Use with SmartDocTM enclosure (E5000-SD) for gel imaging with a smart phone
• Compatible DNA stains: EtBr, SmartGlow™ LD and PS stain, Gel Red, Gel Green, SYBR® Green, SYBR® safe, and Diamond™ Nucleic acid Dye
• 2-yr warranty

This new UV transilluminator features a space-saving design while having 16 x 19 cm UV viewing surface to accommodate large gels or multiple smaller gels. The illuminated surface is comprised of a special black glass which is easy to clean, durable and scratch resistant.

Furthermore, an array of high intensity UV bulbs coupled with an optimized filter provides even illumination across the viewing surface and allows detection of small sample quantities. The dual intensity switch can be used to lower the UV intensity to 50% to reduce DNA damage during long exposure times, or switch to high intensity (100%) for viewing weak fluorescent signals or for photo documentation.

The acrylic UV blocking cover allows safe viewing of samples and has two friction hinges on the front edge to allow angling of the cover for gel access. The cover can be positioned to 90° (straight up) to fit a gel imaging hood, such as the SmartDoc™ imaging enclosure (E5000-SD).

Technical Specifications
Light Source	UV
Wavelength	302 nm
Viewing Surface	16 x 19 cm
Ext. Dimensions	10.5 x 13 x 5.5 in | 26.5 x 32.5 x 14 cm
Electrical	120 or 230V, 50-60Hz
Warranty	2 years

• Lyophilized components to ship without cold chain
• Highly specific detection profile and high priming efficiency
• Rapid detection of COVID-19 and does not detect other related coronavirus strains

Design of our COVID-19 was an intricate process using a dedicated team of expert bioinformaticians. Finding the right sequence is critical for not only assay specificity, but also sensitivity which can be inhibited by primer-dimer formation. These ultimately reduce the assay's ability to detect SARS-CoV-2 accurately. However, the right design will mitigate these risks and ensure a specific, sensitive and accurate test, as we have done.

Our surveillance program is in place to track the mutation of the virus. Our expert bioinformaticians analyze daily published virus sequences to ensure our test maintains a 100% detection profile. Each new mutation presents a risk to any COVID-19 kit detection and false negatives without surveillance programs in place. As of the 17th July 2020 our COVID-19 test has a 100% detection profile with the 42,655 full length, good quality SARS-CoV-2 sequences published on the GISAID-EpiCoV database.

Ensuring your COVID-19 test is stable during transit and storage is vital to prevent reagent degradation. Within our COVID-19 genesig® Real Time PCR assay we provide oasig components that are provided freeze dried which stabilizes the active components. This enables the reagents to be shipped at ambient temperature. This simplifies the logistics of shipping and is cost effective. If you're in a sophisticated laboratory or a mobile field hospital we can supply complete qPCR packages to your door quickly and cheaply via standard shipping methods without the need for dry ice or a cold chain of any sort.

The COVID-19 genesig® Real Time PCR assay was granted Emergency Use Authorization Only by the United States Food and Drug Administration (FDA).

• Increased ultraviolet output and intensity
• No light flicker
• Wider intensity range with variable selection (select models)
• Fast lamp start up
• Universal power supply
• Reduced electrical consumption
• Longer tube life
• Lighter weight
• Improved gel visualization and gel documentation
• UVP's patented 3UV Benchtop Transilluminator provides the selection of 365nm, 302nm and 254nm in one compact unit
• 2UV models offer 302nm and 365nm UV in one model
• Easily view gels under 365nm longwave UV for extended periods of time avoiding photonicking damage. Researchers can use the 302nm midrange to increase the fluorescence for photodocumentation. Shortwave 254nm UV is used to irradiate samples
• All Benchtop Transilluminator models are compact, lightweight units
• These 8-watt models provide a low cost alternative to the High Performance UV Transilluminators
• A variety of filter area work surface sizes are available
• Hinged, clear UV blocking cover, included with each transilluminator, is adjustable for access to the filter surface
• 2 year warranty

WARNING: Transilluminators are powerful sources of ultraviolet radiation which can cause serious damage to unprotected eyes and skin. Read the ultraviolet Caution Information before operating any transilluminators.

* Except M-10 which has standard ballast, 115V unit.

Intensity :

• Select models offer single intensity other models include variable intensity. Refer to the part numbers tab for information.
• Variable intensity settings-High/Medium/Low 
  
• High setting allows for UV excitation of fluorophores on gels for routine photography. Medium is excellent for viewing and quick single-band excision. Low setting allows for positioning and preparation of gels, excising multiple bands, and focusing for photography.

UV Source: Refer to the Part Numbers tab for specific wavelengths for each model

Watts: 8 watts, except M-10 which is 6 watts

Dimensions:

• 3UV Models: 11D x 14W x 5.4H in. (279 x 356 x 137mm) 
  
• 2UV Models: 11D x 14W x 4.8H in. (279 x 356 x 122mm) 
  
• Single UV/Variable Intensity Models (Except M-10): 11D x 14W x 4.8H in. (279 x 356 x 122mm) 
  
• M-10: 7.25D x 10.25W x 4.5H in. (184 x 260 x 114mm) 
  
• Height includes UV blocking cover (all models)

Note about UV: UVP refers to its midrange UV products as 302nm. Other manufacturers may say 300nm, 310nm or 312nm. The spectral output of these units is the same as UVP's 302nm.

Options

• Gel Tools
• Converter Plates
• BioImaging Systems

95-0457-01 (115V)	M-26E	Single	302nm	8 watt	21x26cm
Single UV / Variable Intensity
95-0456-01	M-15V	Variable	302nm	8 watt	15x15cm
95-0452-01	M-20V	Variable	302nm	8 watt	20x20cm
95-0458-01	M-26V	Variable	302nm	8 watt	21x26cm
95-0413-01	M-26XV	Variable	302	8 watt	25x26cm
2UV / Single Intensity
95-0449-01	LM-20	Single	302/365nm	8 watt	20x20cm
95-0459-01	LM-26	Single	302/365nm	8 watt	21x26cm
3UV / Single Intensity
95-0417-01	LMS-20	Single	254/302/365nm	8 watt	20x20cm
95-0414-01	LMS-26	Single	254/302/365nm	8 watt	21x26cm

• Increased ultraviolet output and intensity
• No light flicker
• Wider intensity range with variable selection (select models)
• Fast lamp start up
• Universal power supply
• Reduced electrical consumption
• Longer tube life
• Lighter weight
• Improved gel visualization and gel documentation
• UVP's patented 3UV Benchtop Transilluminator provides the selection of 365nm, 302nm and 254nm in one compact unit
• 2UV models offer 302nm and 365nm UV in one model
• Easily view gels under 365nm longwave UV for extended periods of time avoiding photonicking damage. Researchers can use the 302nm midrange to increase the fluorescence for photodocumentation. Shortwave 254nm UV is used to irradiate samples
• All Benchtop Transilluminator models are compact, lightweight units
• These 8-watt models provide a low cost alternative to the High Performance UV Transilluminators
• A variety of filter area work surface sizes are available
• Hinged, clear UV blocking cover, included with each transilluminator, is adjustable for access to the filter surface
• 2 year warranty

WARNING: Transilluminators are powerful sources of ultraviolet radiation which can cause serious damage to unprotected eyes and skin. Read the ultraviolet Caution Information before operating any transilluminators.

* Except M-10 which has standard ballast, 115V unit.

Intensity :

• Select models offer single intensity other models include variable intensity. Refer to the part numbers tab for information.
• Variable intensity settings-High/Medium/Low 
  
• High setting allows for UV excitation of fluorophores on gels for routine photography. Medium is excellent for viewing and quick single-band excision. Low setting allows for positioning and preparation of gels, excising multiple bands, and focusing for photography.

UV Source: Refer to the Part Numbers tab for specific wavelengths for each model

Watts: 8 watts, except M-10 which is 6 watts

Dimensions:

• 3UV Models: 11D x 14W x 5.4H in. (279 x 356 x 137mm) 
  
• 2UV Models: 11D x 14W x 4.8H in. (279 x 356 x 122mm) 
  
• Single UV/Variable Intensity Models (Except M-10): 11D x 14W x 4.8H in. (279 x 356 x 122mm) 
  
• M-10: 7.25D x 10.25W x 4.5H in. (184 x 260 x 114mm) 
  
• Height includes UV blocking cover (all models)

Note about UV: UVP refers to its midrange UV products as 302nm. Other manufacturers may say 300nm, 310nm or 312nm. The spectral output of these units is the same as UVP's 302nm.

Options

• Gel Tools
• Converter Plates
• BioImaging Systems

95-0457-01 (115V)	M-26E	Single	302nm	8 watt	21x26cm
Single UV / Variable Intensity
95-0456-01	M-15V	Variable	302nm	8 watt	15x15cm
95-0452-01	M-20V	Variable	302nm	8 watt	20x20cm
95-0458-01	M-26V	Variable	302nm	8 watt	21x26cm
95-0413-01	M-26XV	Variable	302	8 watt	25x26cm
2UV / Single Intensity
95-0449-01	LM-20	Single	302/365nm	8 watt	20x20cm
95-0459-01	LM-26	Single	302/365nm	8 watt	21x26cm
3UV / Single Intensity
95-0417-01	LMS-20	Single	254/302/365nm	8 watt	20x20cm
95-0414-01	LMS-26	Single	254/302/365nm	8 watt	21x26cm