MIDSCI PCR 8-Strip Caps are compatible with MIDSCI PCR plates. The caps are available as a dome caps (AVT3878) or flat caps (AVT3799).
Specifications of MIDSCI strip caps:

• Highest standards of quality control
• Lot to Lot consistency
• Certified DNase/RNase, nucleic acid, PCR-inhibitor and pyrogen-free
• See fit chart for plate compatibility

PCR Work-Up Rack fits PCR 0.2ml tubes, strip tubes or 96-well plates (including skirted plates). Polypropylene rack and lid click firmly for secure transportation and storage. Available in assorted colors: blue, green, yellow, violet and red.

• Plate Characteristics
  • 96 x 0.1mL, Sub-skirted
  • Low Profile (0.1mL), Frosted (low signal to noise ratio
  • Extreme Uniformity (EU) Plate Design
  • Uniform wall thickness ensures consistent even heating
  • Thin wall-bottomed tube for rapid heat transfer
• Ideal paring with EU Caps with "Sealing Ring Band" Design
  • Easy open - easy close with ergonomic caps: B57801, B79701, C79701
  • Caps are significantly easier to apply and remove -- Repetitive Strain Injury (RSI) Friendly.
  • Significant reduction in evaporation due to a wider sealing area.
• Certified DNA, DNase, RNA, RNase and pyrogen-free

Please give us a call for a sample!

• Non-Skirt, low-profile (0.1ml)
• Cuttable into 16, 24, 32, or 48-well pieces
• White for optimal qPCR signal/noise ratios
• Thin-wall for consistent and accurate heat transfer
• Ultra-low sample evaporation
• Certified DNAse/RNAse, nucleic acid, PCR-inhibitor, and pyrogen-FREE

Closure can be accomplished with B57801 optical indented strip caps.

• Plate Characteristics
  • 96 x 0.1mL, Sub-skirted, cuttable
  • Low Profile (0.1mL), Frosted (low signal to noise ratio
  • Extreme Uniformity (EU) Plate Design
  • Uniform wall thickness ensures consistent even heating
  • Thin wall-bottomed tube for rapid heat transfer
• Ideal paring with EU Caps with "Sealing Ring Band" Design
  • Easy open - easy close with ergonomic caps: B57801, B79701, C79701
  • Caps are significantly easier to apply and remove -- Repetitive Strain Injury (RSI) Friendly.
  • Significant reduction in evaporation due to a wider sealing area.
• Certified DNA, DNase, RNA, RNase and pyrogen-free

Please give us a call for a sample!

• Standard thermal cycling and qPCR compatible
• Ultra-thin and consistent wall thickness for precise thermal transfer
• Made from 99.9% virgin polypropylene
• Single notch corner
• 335ul well capacity (working capacity dependent on closure method)
• Fits standard thermal cyclers, ABI Real Time PCR 7300, 7500, 7900, qPCR and ABI Sequencing
• Certified DNAse/RNAse and pyrogen-safe

The I-Blue MINI Plasmid Kit was designed for rapid isolation of plasmid DNA from 1-7 mL of cultured bacterial cells. I-Blue Lysis Buffer (an optional color indicator) is included with the kit in order to prevent common handling errors, ensuring efficient cell lysis and neutralization. A modified alkaline lysis method and RNase treatment are used to obtain clear cell lysate with minimal genomic DNA and RNA contaminants. Typical yields are 20-35 µg for high-copy number plasmid or 3-10 µg for low-copy number plasmid from 4 mL of cultured bacterial cells. DNA phenol extraction or alcohol precipitation is not required and the entire procedure can be completed within 15 minutes. The purified plasmid DNA is ready for use in restriction enzyme digestion, ligation, PCR, and sequencing reactions.

Advantages

• Sample: 1-7 mL of cultured bacterial cells
• Yield: Up to 50 µg of pure plasmid DNA
• Format: Plasmid spin column
• Operation Time: Within 15 minutes
• Elution Volume: 30-100 µL
• Kit Storage: Dry at room temperature (15-25°C) for up to 1 year; PD1 and RNase A mixture should be stored at 2-8°C for up to 6 months

Quality Control
The quality of the I-Blue MINI Plasmid Kit is tested on a lot-to-lot basis by isolating plasmid DNA from a 4 mL overnight E. coli (DH5α) culture containing plasmid pBluescript (A600 > 2 U/mL). Following the purification process, a yield of more than 20 µg is obtained and the A260/A280 ratio is between 1.8-2.0. The purified plasmid DNA (1 µg) is used in EcoRI digestion, and analyzed by electrophoresis.

The I-Blue MINI Plasmid Kit was designed for rapid isolation of plasmid DNA from 1-7 mL of cultured bacterial cells. I-Blue Lysis Buffer (an optional color indicator) is included with the kit in order to prevent common handling errors, ensuring efficient cell lysis and neutralization. A modified alkaline lysis method and RNase treatment are used to obtain clear cell lysate with minimal genomic DNA and RNA contaminants. Typical yields are 20-35 µg for high-copy number plasmid or 3-10 µg for low-copy number plasmid from 4 mL of cultured bacterial cells. DNA phenol extraction or alcohol precipitation is not required and the entire procedure can be completed within 15 minutes. The purified plasmid DNA is ready for use in restriction enzyme digestion, ligation, PCR, and sequencing reactions.

Advantages

• Sample: 1-7 mL of cultured bacterial cells
• Yield: Up to 50 µg of pure plasmid DNA
• Format: Plasmid spin column
• Operation Time: Within 15 minutes
• Elution Volume: 30-100 µL
• Kit Storage: Dry at room temperature (15-25°C) for up to 1 year; PD1 and RNase A mixture should be stored at 2-8°C for up to 6 months

Quality Control
The quality of the I-Blue MINI Plasmid Kit is tested on a lot-to-lot basis by isolating plasmid DNA from a 4 mL overnight E. coli (DH5α) culture containing plasmid pBluescript (A600 > 2 U/mL). Following the purification process, a yield of more than 20 µg is obtained and the A260/A280 ratio is between 1.8-2.0. The purified plasmid DNA (1 µg) is used in EcoRI digestion, and analyzed by electrophoresis.

The I-Blue MINI Plasmid Kit was designed for rapid isolation of plasmid DNA from 1-7 mL of cultured bacterial cells. I-Blue Lysis Buffer (an optional color indicator) is included with the kit in order to prevent common handling errors, ensuring efficient cell lysis and neutralization. A modified alkaline lysis method and RNase treatment are used to obtain clear cell lysate with minimal genomic DNA and RNA contaminants. Typical yields are 20-35 µg for high-copy number plasmid or 3-10 µg for low-copy number plasmid from 4 mL of cultured bacterial cells. DNA phenol extraction or alcohol precipitation is not required and the entire procedure can be completed within 15 minutes. The purified plasmid DNA is ready for use in restriction enzyme digestion, ligation, PCR, and sequencing reactions.

Advantages

• Sample: 1-7 mL of cultured bacterial cells
• Yield: Up to 50 µg of pure plasmid DNA
• Format: Plasmid spin column
• Operation Time: Within 15 minutes
• Elution Volume: 30-100 µL
• Kit Storage: Dry at room temperature (15-25°C) for up to 1 year; PD1 and RNase A mixture should be stored at 2-8°C for up to 6 months

Quality Control
The quality of the I-Blue MINI Plasmid Kit is tested on a lot-to-lot basis by isolating plasmid DNA from a 4 mL overnight E. coli (DH5α) culture containing plasmid pBluescript (A600 > 2 U/mL). Following the purification process, a yield of more than 20 µg is obtained and the A260/A280 ratio is between 1.8-2.0. The purified plasmid DNA (1 µg) is used in EcoRI digestion, and analyzed by electrophoresis.

The I-Blue MINI Plasmid Kit was designed for rapid isolation of plasmid DNA from 1-7 mL of cultured bacterial cells. I-Blue Lysis Buffer (an optional color indicator) is included with the kit in order to prevent common handling errors, ensuring efficient cell lysis and neutralization. A modified alkaline lysis method and RNase treatment are used to obtain clear cell lysate with minimal genomic DNA and RNA contaminants. Typical yields are 20-35 µg for high-copy number plasmid or 3-10 µg for low-copy number plasmid from 4 mL of cultured bacterial cells. DNA phenol extraction or alcohol precipitation is not required and the entire procedure can be completed within 15 minutes. The purified plasmid DNA is ready for use in restriction enzyme digestion, ligation, PCR, and sequencing reactions.

Advantages

• Sample: 1-7 mL of cultured bacterial cells
• Yield: Up to 50 µg of pure plasmid DNA
• Format: Plasmid spin column
• Operation Time: Within 15 minutes
• Elution Volume: 30-100 µL
• Kit Storage: Dry at room temperature (15-25°C) for up to 1 year; PD1 and RNase A mixture should be stored at 2-8°C for up to 6 months

Quality Control
The quality of the I-Blue MINI Plasmid Kit is tested on a lot-to-lot basis by isolating plasmid DNA from a 4 mL overnight E. coli (DH5α) culture containing plasmid pBluescript (A600 > 2 U/mL). Following the purification process, a yield of more than 20 µg is obtained and the A260/A280 ratio is between 1.8-2.0. The purified plasmid DNA (1 µg) is used in EcoRI digestion, and analyzed by electrophoresis.

• Optimized for use with all of IBI 96-well kits
• The thin upper portion of the manifold is designed to reduce cross contamination
• Allows for the most effective extraction and purification of plasmid DNA, genomic DNA, viral DNA & RNA, total RNA and PCR products
• Materials: Manifold - made of anodized aluminum, Gasket - Ethylene propylene, O-Ring - Silicone
• Dimensions: 17x12x8cm
• Maximum vacuum: Approx. 71cm Hg (28 in Hg) (-13.7psi)